I need some help im new to printers

[upper stream]

Hello my 3D printer has been having so printing issues lately its been making Theas weird type of dents. How do i fix it?

[livid heart]

AI Help

It sounds like you may be experiencing under-extrusion, which can cause dents in your prints. Here are a few steps you can try to fix the issue:

1. Check your filament: Make sure your filament is not tangled or has any knots that could be obstructing the flow.
2. Clean the extruder: Your nozzle may be clogged, try a cold pull or a nozzle cleaning kit to clear any obstructions.
3. Adjust your extrusion multiplier: You may need to increase the extrusion multiplier in your slicer settings to ensure enough filament is being pushed through.
4. Calibrate your extruder steps/mm: Make sure your extruder is properly calibrated so it's pushing out the correct amount of filament.
5. Check for loose belts: Loose belts can cause inconsistent extrusion, make sure all your belts are tight and properly tensioned.
   Try these steps and see if they help improve your print quality.

WARNING: This response is AI generated and may contain errors.

[noble haven]

Get a clearer photo.

That's the first step

[hardy root]

thats real

[upper stream]

ok

[hardy root]

underextrusion looks like it

or just extreme ringing

[upper stream]

here

[hardy root]

what printer / speed / accel

[upper stream]

40.0

and here

[hardy root]

printer?

[upper stream]

ANYCUBIC printer

anycubic kobra +

[upper stream]

its god

good