Ender 3 V2 Neo: Prints are short on the Z axis | 3D Printing | Page 1

vestal sleet Apr 22, 2024, 2:59 PM

#

Is this a leveling issue? Both of these were printed from the same gcode file but one of them is shorter on the side with the hexagon. The other sides are the same height. Sliced in Creality Print

edgy totemBOT Apr 22, 2024, 2:59 PM

#

vestal sleet Is this a leveling issue? Both of these were printed from the same gcode file bu...

#

AI Help

Yes, it is possible that this issue is related to bed leveling. It could also be caused by an uneven print surface or a problem with the Z-axis calibration. I recommend checking and adjusting the bed leveling and making sure all axis movements are smooth and properly calibrated.

shell linden Apr 22, 2024, 3:16 PM

#

Don't use creality slicer

#

anyways you just need to calibrate it i think

#

idk how

#

i have the same problem on my ender 3

#

idk how to fix it

edgy totemBOT Apr 22, 2024, 5:19 PM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

vestal sleet Apr 22, 2024, 5:34 PM

#

Any advice?

#Ender 3 V2 Neo: Prints are short on the Z axis