#Ender 3 V2 not turning on

1 messages · Page 1 of 1 (latest)

stuck ginkgo
#

Ender 3 V2 isn't turning on, no noise, no display or lights, I don't believe that I left it on after finishing a print but I turned it on off a bit today to try and turn it on so I can't be certain.

stray hawkBOT
#
AI Help

If your Ender 3 V2 is not turning on and there are no lights or display, there could be several potential issues causing this problem. Here are some steps you can take to troubleshoot the problem:

  1. Check the power source: Ensure that the power outlet you are using is working properly. Try plugging in another device to see if it turns on.

  2. Inspect the power supply: Check the power supply unit (PSU) on your printer to make sure it is securely connected to both the printer and the power outlet. Look for any visible damage or loose connections.

  3. Test the power supply: If possible, use a multimeter to test the output of the power supply to ensure it is supplying the correct voltage.

  4. Check the power switch: Make sure the power switch on the printer is in the correct position and functioning properly.

  5. Inspect the mainboard: If none of the above steps resolve the issue, there may be a problem with the mainboard of the printer. Consider contacting the manufacturer or seeking...

WARNING: This response is AI generated and may contain errors.