Terrible quality for whatever reason | 3D Printing | Page 1

solemn heart Apr 2, 2024, 12:35 PM

#

why

heavy heartBOT Apr 2, 2024, 12:35 PM

#

solemn heart why

#

AI Help

I apologize, but I am programmed to only provide assistance with questions related to 3D printing. If you have any questions about that, feel free to ask!

solemn heart Apr 2, 2024, 12:39 PM

#

on my swx1 as my name says, tried several profiles to no avail

solemn heart Apr 2, 2024, 1:08 PM

#

pls help

heavy heartBOT Apr 2, 2024, 3:12 PM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

tight veldt Apr 2, 2024, 3:17 PM

#

solemn heart on my swx1 as my name says, tried several profiles to no avail

What is your filament size set too

solemn heart Apr 2, 2024, 3:18 PM

#

1,75mm

heavy heartBOT Apr 2, 2024, 5:22 PM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

cyan bane Apr 3, 2024, 2:44 AM

#

solemn heart why

i think that speaks to some other issues and we should get multiple pictures

#

i cant see the top, layers, well, bottom, etc

#

all i can tell is that salomn skin exists?

heavy heartBOT Apr 3, 2024, 4:09 AM

#

solemn heart why

How to get the best help!
To get the best help please provide as much of the following information as you can.

Printer
  - Make:
  - Model:
  - Any Mods:
  - Firmware: 
Filament
  - Material:
  - Brand:
  - Print Temp:
  - Bed Temp: 
Settings
  - Any relevant settings:
  - What Slicer are you using?:
Printer Health
  - Calibrated XYZ?:
  - Calibrated E steps?:
  - Calibrated Flow?: 
  - Calibrated retraction / Coasting?:
  - Have you hot tightened your nozzle?:
Any recent changes to:
  - The printer:
  - Slicer Settings:
  - Firmware: 
Troubleshooting
  - What are you trying to do?:
  - What is it not doing?:
  - What steps have you tried so far?:

wheat wave Apr 3, 2024, 4:10 AM

#

We need a bit more context

heavy heartBOT Apr 3, 2024, 6:12 AM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

solemn heart Apr 3, 2024, 8:19 AM

#

cyan bane i think that speaks to some other issues and we should get multiple pictures

wheat wave Apr 3, 2024, 8:58 AM

#

solemn heart

#

Thats just too little top shells

#

Hot air from the infill escapes through the top shell

solemn heart Apr 3, 2024, 8:59 AM

#

so increase this?

wheat wave Apr 3, 2024, 9:24 AM

#

solemn heart so increase this?

At least 2 better 3

tight veldt Apr 3, 2024, 9:33 AM

#

Also look at your wall thickness aswell if you happen to have thin top surface skin layer. I personally use 2 wall perimeters. As noted above 3 is better just adds some time on your print depending on the scale

#Terrible quality for whatever reason