Print keeps messing up | 3D Printing | Page 1

slow creek Mar 25, 2024, 8:16 PM

#

hello im completely new to 3d printing and i have run into an issue where this part of a keyblade that im printing on my Ender 3 keeps running into the same problem every time I try to print it. I dont know how to describe it so ill put a image of it and if the stl file is needed for inspection dm me so i can send it.

vivid escarpBOT Mar 25, 2024, 8:16 PM

#

slow creek hello im completely new to 3d printing and i have run into an issue where this p...

#

AI Help

Hello! I'd be happy to help troubleshoot the issue with your keyblade print. Feel free to share the image of the problem you're encountering, and if necessary, I can provide advice on how to adjust your print settings or orientation. Let's take a look at the image first to see what's going on.

static lily Mar 25, 2024, 8:23 PM

#

Do you have supports on?

slow creek Mar 25, 2024, 8:24 PM

#

no

slow creek Mar 25, 2024, 8:27 PM

#

static lily Do you have supports on?

ive been printing the part out as it is since it also worked with the other parts that ive printed for the keyblade

static lily Mar 25, 2024, 8:52 PM

#

slow creek no

I was thinking that you had supports on and It was trying to cover up the girl but since not I don’t know

late portal Mar 25, 2024, 8:55 PM

#

How new are u to printing?

#

I can help

slow creek Mar 25, 2024, 9:14 PM

#

late portal How new are u to printing?

im pretty new as in i just grab an stl file for any print im about to do and just put it on a 3d printer, but i have printed some parts already and have learned from my mistakes

slow creek Mar 25, 2024, 9:19 PM

#

late portal I can help

but yea what do you think could be the problem?

late portal Mar 25, 2024, 9:25 PM

#

Nevermind

#

Is that the top or bottom and did u print with a raft?

slow creek Mar 25, 2024, 9:35 PM

#

late portal Is that the top or bottom and did u print with a raft?

its the top and no i did not

late portal Mar 25, 2024, 9:42 PM

#

slow creek its the top and no i did not

it’s probably a problem with your top layer not sticking with the other layers. not totally sure

slow creek Mar 25, 2024, 9:51 PM

#

late portal it’s probably a problem with your top layer not sticking with the other layers. ...

well if thats the case how could i fix that?

vivid escarpBOT Mar 25, 2024, 11:52 PM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

#Print keeps messing up