#[Klipper] 3Dtouch always states "open"

1 messages · Page 1 of 1 (latest)

spare cloud
#

it worked yesterday, and now when i QUERY_PROBE it states open in both positions.

storm tideBOT
#
AI Help

It sounds like there may be an issue with the connection or functionality of the probe. Here are a few troubleshooting steps you can try:

  1. Check the physical connection of the probe to the printer. Make sure it is securely plugged in.
  2. Inspect the probe itself for any damage or loose components.
  3. Try power cycling the printer to see if that resolves the issue.
  4. If the problem persists, you may need to recalibrate or replace the probe.

If these steps do not resolve the issue, you may want to consult the manufacturer's guidelines or seek assistance from a professional technician.

WARNING: This response is AI generated and may contain errors.
spare cloud
#

just checked the wiring, it's ok

#

now that I touched a wire, it's always triggered. So the issue is S wire, but can the sensor work without it, like an endstop?

#

so it's always "open" when the green wire is plugged in and always "triggered" when it's unplugged

image.png