Perfecting my printer.

[hearty lava]

Hello. I did a test print and the results i had were that my printer has issues with overextrusion (stringing) and it also had issues with text. It also has lines for each layer. Heres a picture of my test print.

[novel moth]

AI Help

Hello. It sounds like you are experiencing issues with overextrusion, stringing, text quality, and layer lines in your 3D print. To address overextrusion and stringing, you can try adjusting the printing temperature, retraction settings, and print speed. For improving text quality, consider increasing the resolution or using a smaller nozzle size if possible. As for the layer lines, adjusting the layer height and ensuring proper bed leveling can help. Feel free to ask for more specific guidance on any of these areas. Also, feel free to share the picture of your test print so I can provide more targeted assistance.

WARNING: This response is AI generated and may contain errors.

[hearty lava]

You can see the layers

text issues

[frail pilot]

have you tuned e steps

[hearty lava]

whatever that is

[hearty lava]

e steps?

[frail pilot]

if you tell your extruder to extrude 100mm it might do 110

so you should tune it

?tuning

[novel moth]

https://ellis3dp.com/Print-Tuning-Guide/

[hearty lava]

@frail pilot do you know whats causing the lines to appear?

[frail pilot]

which lines

[hearty lava]

@frail pilot

[frail pilot]

looks like over extrusion so tune esteps

[hearty lava]

more over extrusion?

stringing is overextrusion right

[frail pilot]

no

[raw sinew]

stringing might be hotend temp too high or u need to tune retraction distance and speed however i dont see stringing in the pictures u provided