sv06 plus in pursa slicer

[polar gate]

hello i wanna switch to pusa slicer only problem how do i make it so i can use sv6 plus because i cant find it

[shadow pasture]

AI Help

To use the PrusaSlicer software with SV6 Plus, you will need to set up a custom printer profile. Here are the steps to do so:

1. Open PrusaSlicer and go to "Printer Settings" by clicking on the wrench icon in the top-right corner.
2. Click on the "Add" button under the "Custom Printer" section.
3. In the pop-up window, choose a name for your printer profile, for example, "SV6 Plus."
4. Under the "General" tab, select the appropriate printer model (such as Prusa i3 MK3S) that closely matches your SV6 Plus.
5. In the "Extruder 1" tab, configure the nozzle diameter, filament diameter, and print settings according to your SV6 Plus specifications. You can find these details in the SV6 Plus documentation or manufacturer's website.
6. Adjust other settings like print bed size, filament temperature, cooling, and any other specific requirements your printer may have.
7. Once you're done configuring all the necessary settings, click on the "OK" button to save the custom printer profile.
8. Y...

WARNING: This response is AI generated and may contain errors.

[stuck vortex]

select the regular sv06 and edit the print bed in the printer settings, if thats not there then choose the prusa mk3s/+ whatever it was

[polar gate]

thanks i found the sv06