Fluidd keeps telling me my print has failed, but the print is complete | 3D Printing | Page 1

gilded plover Feb 5, 2024, 7:37 AM

#

Hi! I’ve just rooted my Nebula pad on my Ender 3 v2. I’m having no real issues with it apart from the interface telling me it’s failed when the print is complete. Has anyone had this issue and knows how to fix it?

random waveBOT Feb 5, 2024, 7:37 AM

#

gilded plover Hi! I’ve just rooted my Nebula pad on my Ender 3 v2. I’m having no real issues w...

#

AI Help

Based on your description, it seems like the issue might be with the firmware or software on your Ender 3 v2. First, ensure that you have the latest firmware installed on your printer. You can check the manufacturer's website for firmware updates or join online forums or communities dedicated to Ender 3 printers for troubleshooting assistance.

If you already have the latest firmware, try resetting the printer to its factory settings and then reconfiguring it. This can help eliminate any software glitches causing the false "print failed" message.

If the issue persists, you can also try using different slicing software to generate the G-code for your prints. Sometimes, compatibility issues between the printer's firmware and the slicer software can cause such problems.

If none of these solutions work, reach out to the manufacturer's customer support for further assistance. They will have more in-depth knowledge about their products and can guide you through the troubleshooting proce...

ornate sequoia Feb 5, 2024, 7:38 AM

#

Probably something in the PRINT_END (END_PRINT) Macro, does the console throw any error messages?

gilded plover Feb 5, 2024, 8:16 AM

#

The only error it was giving me was !! {"code":"key111", "msg": "Extrude below minimum temp

ornate sequoia Feb 5, 2024, 8:29 AM

#

that tells exactly what happend, find out what told it to extrude at the end of the print while or after cooldown

thick hemlock Feb 5, 2024, 10:23 AM

#

gilded plover The only error it was giving me was !! {"code":"key111", "msg": "Extrude below m...

probably something like the end gcode shutting off the heater, moving somewhere and then trying to retract the filament up a bit. If the heater cooled down to below 185 (I think that's the default value) due to the move, it'll error out like that

random waveBOT Feb 5, 2024, 12:28 PM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

gilded plover Feb 5, 2024, 4:12 PM

#

I’m fairly new to Klipper, so I’m not entirely sure what I’m looking at/for

#

#

this is what my gcode looks like at the moment

thick hemlock Feb 5, 2024, 4:21 PM

#

gilded plover

yup, move the first block to after the second, and it should be fine

#

also see if your slicer end gcode maybe has more than just END_PRINT in it

gilded plover Feb 5, 2024, 5:01 PM

#

thick hemlock also see if your slicer end gcode maybe has more than just `END_PRINT` in it

Great! That worked. Thank you very much!

#Fluidd keeps telling me my print has failed, but the print is complete