AI Help
It sounds like you may be experiencing an issue with your slicing settings. When the infill does not reach the top of the print, it could be due to a few different factors.
First, make sure you have the correct layer height set in your slicing software. A smaller layer height may help improve the infill coverage. Additionally, check the infill density setting. Increasing the infill density or choosing a different infill pattern can fill in the gap between the infill and the top layers.
You can also try adjusting the top layer thickness setting in your slicer. Increasing this value can help ensure that the top layers bond properly with the infill.
Lastly, ensure that your printer's firmware is up to date, as outdated firmware can sometimes cause issues with infill behavior.
If you still encounter difficulties, please provide more details about your slicer software and printer model so that I can provide more specific assistance.
lapis raven
neon pike