#temp tower results

1 messages · Page 1 of 1 (latest)

nocturne pelican
#

Looking to tell which temp I should be running.

20240131_202017.jpg 20240131_202008.jpg
umbral pierBOT
#
AI Help

The recommended nozzle and bed temperatures for 3D printing can vary depending on the type of filament you are using. As a general guideline:

  1. PLA filament typically prints well with a nozzle temperature between 190-220°C and a bed temperature around 50-60°C.
  2. ABS filament usually requires a higher nozzle temperature, ranging from 220-260°C, and a bed temperature around 90-110°C.
  3. For PETG filament, try a nozzle temperature range of 230-250°C and a bed temperature around 60-80°C.

It's important to note that these are just starting points and you may need to experiment with temperature settings to obtain the best results for your specific printer and filament brand. It's a good idea to refer to the manufacturer's recommendations and guides for the filament you are using.

WARNING: This response is AI generated and may contain errors.