tpu not working on x1c | 3D Printing | Page 1

craggy badger Jan 30, 2024, 9:59 PM

#

It pushes through when loading but not when printing

south flareBOT Jan 30, 2024, 9:59 PM

#

#

AI Help

If your 3D printer is successfully loading the filament but encounters difficulty printing, there could be a few possible reasons for this issue:

Clogged nozzle: A clogged nozzle can block the filament from extrusion during the print process. Try cleaning the nozzle by using a small needle or filament cleaning tool to gently remove any obstructions. Additionally, some printers offer a "hot pull" or "cold pull" function to unclog the nozzle.
Filament feeding issue: Check the filament path and make sure it is not tangled or obstructed. Sometimes the filament can become twisted, causing it to bind or jam. Ensure that the filament spool is properly mounted and that there are no knots or knots in the filament.
Incorrect temperature settings: If the printing temperature is too low, the filament may not melt consistently and struggle to flow smoothly. Verify that the temperature settings you are using are suitable for the type of filament you are using.
Extruder gear slippi...

craggy badger Jan 30, 2024, 11:26 PM

#

Help?

hushed berry Jan 30, 2024, 11:33 PM

#

If I knew much about the X1C I'd offer help - are you trying to use it with the AMS?

craggy badger Jan 30, 2024, 11:46 PM

#

Nope

south flareBOT Jan 31, 2024, 1:50 AM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

craggy badger Feb 1, 2024, 1:27 AM

#

.

#tpu not working on x1c