Rounder Side Printing

[keen locust]

I’m looking for a way to make the model in the image more round, like the STL. It just seems to be printing flat. I’ve tried supports and, if anything, it made it worse. I need it to stop “drooping” and be more rounded. Any help would be appreciated

[gilded yoke]

AI Help

To make your model more rounded during printing, you can follow these steps:

1. Check your model: Ensure that your 3D model is designed properly and has a rounded shape. If necessary, modify the model to make it more rounded and suitable for 3D printing.

2. Increase the layer height: Try increasing the layer height in your slicing software. A larger layer height will result in faster printing and a more rounded appearance. However, keep in mind that increasing the layer height too much might compromise the overall quality of the print.

3. Adjust the print speed: Slowing down the print speed can help improve the roundness of your print. Lower print speeds allow the layers to cool and solidify more effectively, reducing any potential drooping or warping.

4. Decrease the print temperature: Lowering the print temperature can also reduce drooping and improve the print's roundness. Experiment with slightly lower temperatures until you find the optimal setting for your specific filamen...

WARNING: This response is AI generated and may contain errors.

[queen fog]

What slicer do you use?

[queen fog]

The printer might need some maintenance from what I see in the picture, the print looks questionable

[keen locust]

I use Kiri Moto Browser Slicer. My printer shouldn’t have a problem mechanically as it pretty much brand new and other prints have worked out well