Why does my temp tower look like such crap | 3D Printing | Page 1

gaunt aurora Jan 20, 2024, 9:09 PM

#

Why do the oberhangs look so bad, i printed a retraction tower and it looked fine

rn_image_picker_lib_temp_03f0d296-66f5-49b9-b8a4-ac732a7abc27.jpg

trail flareBOT Jan 20, 2024, 9:09 PM

#

gaunt aurora Why do the oberhangs look so bad, i printed a retraction tower and it looked fin...

#

AI Help

The quality of overhangs in 3D printing can vary based on several factors such as printer settings, material type, and cooling. Retraction towers are usually not the best representation of overhangs since they have vertical walls that provide more support. In general, to improve overhangs, you can try reducing the printing speed, increasing the cooling fan speed, or adjusting the printing temperature. Additionally, using support structures for more challenging overhangs can help achieve better results.

gaunt aurora Jan 20, 2024, 9:10 PM

#

Im running a cr 10 with pla at 210 degrees

trail flareBOT Jan 20, 2024, 11:12 PM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

gaunt aurora Jan 20, 2024, 11:12 PM

#

Bump

trail flareBOT Jan 21, 2024, 1:17 AM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

gaunt aurora Jan 21, 2024, 1:17 AM

#

Bump

#

Maybe something to do with print speed?

trail flareBOT Jan 21, 2024, 3:22 AM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

gaunt aurora Jan 21, 2024, 3:22 AM

#

bump

#Why does my temp tower look like such crap