Just had a print randomly stop on me using OctoPrint

[ebon basin]

So, i started a 15hour print yesterday at about 11pm and about 15min ago it randomly stopped without any inputs from me (at least not intentional). Usually when cancelling a print via OctoPrint it gives a message on the printer itself that the current print has finished, but it didn't. In the OctoPrint UI there also wasn't any file in the status field where you usually find the file that is currently printing. Can anyone explain to me why this could have happened?
Specs of my setup for information:
Printer: Anycubic Kobra
OctoPrint Host: Old Huawei P30 connected to printer via USB adapter

[modest star]

AI Help

There could be several reasons for this issue. Here are a few possible explanations:

1. Connectivity issues: Check the USB connection between your OctoPrint host and the printer. Sometimes, loose or faulty connections can disrupt the printing process or cause the print to stop unexpectedly.

2. Power-related problems: Ensure that your printer and OctoPrint host are not experiencing power disruptions. Verify that both are connected to stable power sources or consider using a UPS (Uninterruptible Power Supply) to prevent power outages from affecting your prints.

3. Software or firmware issues: Check for any updates for both your OctoPrint software and the firmware on your AnyCubic Kobra printer. Upgrading to the latest versions can often resolve compatibility or stability issues.

4. G-code or slicing issues: It's possible that there may have been an issue with the generated G-code or the slicing process itself. If the problem persists, try reslicing the model using different settin...

WARNING: This response is AI generated and may contain errors.

[ebon basin]

There also definitely wasn't a power issue

[modest star]

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

[ebon basin]

Can somebody help please?