E3V2 not starting a print | 3D Printing | Page 1

spare creek Jan 18, 2024, 3:20 AM

#

not sure what to do here, but need this thing running quick. need it for a display in the morning :)

vital troutBOT Jan 18, 2024, 3:20 AM

#

spare creek not sure what to do here, but need this thing running quick. need it for a displ...

#

AI Help

I'm here to help you with your 3D printing needs! Please let me know what specific issue you are facing, and I'll do my best to assist you in getting your printer up and running as quickly as possible.

spare creek Jan 18, 2024, 3:21 AM

#

E3V2, just a bltouch afaik, marlin, PLA, using the pre sliced ender leveling model on google, otherwise orca

#

nothing looks abnormal, it just won't start going

#

here's me homing and starting a print

#

i'm taking a video of it going once this thing heats

#

i should note it insists on being 0c instead of starting to heat once i start the print
even with other files

somber dust Jan 18, 2024, 3:36 AM

#

looks like the bed is heating fine but the extruder temperature target never changes, then it tries to do its first extrude move and errors because the extruder temperature is too low. probably something missing from start gcode in the slicer or the presliced gcode, or firmware misconfigured. post the gcode you're working with, and also try to set the nozzle temperature manually via the LCD screen and see if the nozzle temp raises

spare creek Jan 18, 2024, 3:37 AM

#

this is what i'm primarily doing, and it'll heat if i set it via the lcd

📎 Calibrate_Wizard__Test_Print_PLA_v3.gcode

#

well as soon as it homes it sets the target to 0.. uhhh

somber dust Jan 18, 2024, 3:38 AM

#

spare creek this is what i'm primarily doing, and it'll heat if i set it via the lcd

that's just moving to positions and pausing the print so you can adjust the bed, possible firmware doesn't respond well to the M0 pause print command and is erroring or something. try printing something.

spare creek Jan 18, 2024, 3:39 AM

#

somber dust that's just moving to positions and pausing the print so you can adjust the bed,...

i've got a benchy i sliced on orca with the e3v2, one sec

somber dust Jan 18, 2024, 3:39 AM

#

it says right there what it does
bed temp to 60
nozzle to 0
G28 home
lift z axis, move to position 1, pause the print

spare creek Jan 18, 2024, 3:39 AM

#

wtf okay uhhh, let me try benchy

#

i take that back, trying a voron cube sliced with orca

#

that's putting it at 150 off to a good start

somber dust Jan 18, 2024, 3:40 AM

#

yeah i think this is just an issue of you not doing your due dilligence and printing files you don't fully understand. the printer probably works fine. find a getting started guide and follow it.

spare creek Jan 18, 2024, 3:41 AM

#

i'm already somewhat versed, didn't think the file would be doing a funny

#

and this is why i don't use presliced gcode

spare creek Jan 18, 2024, 3:59 AM

#

?solved

#E3V2 not starting a print