Extruder not engaging after first print from cold boot

[olive fossil]

• Ender 3 S1 Pro w/ Sonic Pad
• Using KAMP macro

Anyone experienced their extruder just not engaging when printing a second print after finishing/cancelling one? No error, just continues on printing with the extruder not extruding. I currently have to full reboot my whole printer (E3S1Pro w/ Klipper via Sonic Pad) after every print - a simple firmware reboot does not fix it. This didn't always happen, and has only recently started to happen. There's a few variables that have changed recently which might be affecting it. For one, I updated the Sonic Pad firmware, so Creality may have stuffed something up. I have also made some modifications to my macros and added KAMP, so I suspect it has something to do with that, but can't work out for sure.

Macros are here.

[sinful socket]

AI Help

It seems like you are experiencing an issue with your extruder not engaging when printing a second print. This can be frustrating, but there are a few things you can try to troubleshoot the problem.

First, ensure that your filament is properly loaded and there are no obstructions in the extruder or hot end. Check if the filament is feeding smoothly when the extruder is manually pushed.

Next, I recommend checking your slicer settings to make sure they are correctly configured for your printer. Ensure that the filament diameter, extrusion multiplier, and retraction settings are accurate.

Since you mentioned updating the Sonic Pad firmware and modifying macros, it's possible that there may be an issue with the firmware or the macros themselves. I suggest reverting to the previous firmware version and macros to see if the issue persists. If it does not, it might indicate an incompatibility or an error in the updated version.

If none of these steps resolve the issue, it may be helpfu...

WARNING: This response is AI generated and may contain errors.