#How to fix this ?

1 messages · Page 1 of 1 (latest)

old adder
#

Hello,

Happy new year everyone.

Do you know how to fix this problem ? (like a big stringing on overhanging parts of a print)

This pic is from google

My Printer : Ender 3 V3 SE

Thanks a lot

image.png
tender acornBOT
#
AI Help

Hello,

Happy new year to you too! I'm sorry to hear that you're facing stringing issues on your prints. Stringing often occurs when the filament oozes out of the nozzle while the print head is moving between different parts of the print.

To fix this problem, you can try the following solutions:

  1. Retraction settings: Increase the retraction distance in your slicer settings. This will pull the filament back slightly when the print head moves, reducing the chances of oozing. You can experiment with different retraction distances to find the optimal value for your printer.

  2. Print temperature: Lowering the print temperature can also help reduce stringing because it decreases the overall viscosity of the filament. Again, you will need to experiment with different temperature settings to find what works best for your specific filament.

  3. Enable or adjust z-hop: Enabling z-hop in your slicer settings will lift the nozzle slightly during non-printing moves, minimizing contact with ...

WARNING: This response is AI generated and may contain errors.