#Print not working

1 messages · Page 1 of 1 (latest)

vagrant rock
#

Hello, sometimes my printer Renkforce rf100 deletes my data from Sd card. Before I put the Sd card inside my printer the data Keychain has for example 3mb than I try to print it and nothing happens. After this I take the Sd card back in my pc and the data is still there but with 0MB.
Can someone tell me what’s wrong?
Thanks

acoustic gateBOT
#
AI Help

It appears that there may be an issue with your SD card or the way it is being read by your Renkforce RF100 printer. Here are a few possible solutions you can try to troubleshoot this problem:

  1. Check the SD card: Make sure the SD card is not damaged or corrupted. Try using a different SD card to see if the issue persists.

  2. Format the SD card: Sometimes formatting the SD card can resolve compatibility issues. Before doing this, make sure to back up any important files on the card. Format the card using the appropriate format (FAT32 is commonly used).

  3. Check the firmware: Make sure your Renkforce RF100 printer is running the latest firmware version. Check the manufacturer's website for any available updates and follow the instructions to update the firmware if necessary.

  4. Test with a different USB cable: A faulty USB cable can sometimes cause issues with data transfer. Try using a different USB cable to connect your printer to your computer.

  5. Contact support: If the iss...

WARNING: This response is AI generated and may contain errors.