#Klipper uninstall

1 messages · Page 1 of 1 (latest)

sand badge
#

Hi,
I was wondering how to install the firmware I have just uninstalled klipper
but the stock firmware wont flash I have tryed diffrent names
nothing has worked so far. It just shows this screen.

PXL_20231220_214449100.MP.jpg PXL_20231220_214446572.MP.jpg
winter yarrowBOT
#
AI Help

To reinstall the firmware after uninstalling Klipper, you will need to follow these steps:

  1. Identify your printer model, as different printers have different firmware flashing processes. Check your printer's manufacturer documentation or online forums for specific instructions.

  2. Download the firmware for your printer model. Ensure that you have the correct firmware version that is compatible with your printer.

  3. Connect your printer to your computer using a USB cable.

  4. Open the firmware flashing software that is recommended for your printer. Some popular options are Arduino IDE, Pronterface, or OctoPrint.

  5. In the firmware flashing software, select the correct serial port that corresponds to your printer.

  6. Choose the firmware file that you downloaded in step 2.

  7. Click the "Flash" or "Upload" button to start the firmware installation process. Be patient, as this may take a few minutes.

If you have followed these steps and are still experiencing issues, I would rec...

WARNING: This response is AI generated and may contain errors.