#My model isn't able to stick to the printer

1 messages · Page 1 of 1 (latest)

ripe pelican
#

the model is quite big and I have to stay this size, but when I'm printing, the model isn't rlly sticking on the printer, it's a flusn qqrs pro

stoic boughBOT
#
AI Help

If your 3D model isn't sticking to the printer bed, here are a few troubleshooting tips for the Elegoo Mars Pro:

  1. Level the bed: Ensure that the printer bed is properly leveled. Use the built-in bed leveling feature or manually adjust the bed to make it completely parallel to the screen.

  2. Clean the bed: Make sure the build plate is clean and free from any residue. Use isopropyl alcohol or a specialized cleaner recommended by the manufacturer to clean the bed before each print.

  3. Increase adhesion: Apply a small amount of adhesive to the build plate to improve model adhesion. You can use a specialized 3D printing adhesive or a glue stick (like PVA glue).

  4. Adjust bottom exposure time: If the model still doesn't stick, you can increase the exposure time for the bottom layers in your slicing software. This allows the resin to cure more and provides better adhesion to the build plate.

  5. Check resin temperature: Ensure that the resin is at the appropriate temperature for prin...

WARNING: This response is AI generated and may contain errors.
untold raptor