#Ender 3 V2 Neo Clogging driving me crazy

1 messages · Page 1 of 1 (latest)

austere needle
#

I got this Ender 3 V2 Neo about a month ago, two weeks it clogged mid print, I was trying to fix it for a whole week but I gave up and it's been laying dormant for a week. It's fully stock except for a capricorn tube that I added in hopes of fixing the issue. The issue is most likely heat creep, but the fans seem to be running alright and I don't see a reason why it would suddenly stop working like that.

sullen sentinelBOT
austere needle
#

I've tried two different PLA Filaments, and I don't think it's the filaments because I don't see how they'd both just start clogging at the same time (different companies, CC3D and Eryone)

#

When it clogs it usually starts printing in the air (no filament coming out)

#

It never makes spaghetti

austere needle
#

.

austere needle
#

.

austere needle
#

😭

somber merlin
#

Is your nozzle clogged?

velvet elm
austere needle
austere needle
velvet elm
#

may try 190

#

check if your nozzle is screwed all the way in too

austere needle
#

Btw it happens like an hour into a print

austere needle
austere needle
velvet elm
#

could be that your printer is trying to push too much material into the nozzle

austere needle
#

It's not a retraction issue

velvet elm
#

i do not mean retraction

austere needle
velvet elm
#

one of them being filament diameter

austere needle
#

I've tried it on old gcode that printed perfectly before

velvet elm
#

if the old gcode still prints fine then there is a problem in your new gcode

austere needle
#

It doesn't anymore

velvet elm
#

that means the printer is the problem

austere needle
#

Yeah

velvet elm
#

try to find something on the internet as i don't have a ender 3

Could say disassemble you hotend and start checking everything that the filament touches

somber merlin
#

Or try and heat it up and stick the little needle the printer came with through it

austere needle
coral stratus
#

Is that a ptfe lined hotend? If so, check if the ptfe tube is secure inside the hotend and has no play

#

If it slips up in the hot zone it creates a blob like the one in your picture. Check your tube fittings and look for missing retainer rings.

sullen sentinelBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

austere needle
#

Damn I refunded it

#

?solved