#i need help with layer problems

1 messages · Page 1 of 1 (latest)

violet mauve
#

What do I do my brand new elegoo Neptune 3 pro is making these ugly layer lines and I don't know how to get rid of them I tried different temps flow It didn't help what do I do

IMG_1454.jpg IMG_1453.jpg
vernal sableBOT
#
AI Help

If you're experiencing layer lines on your prints with your Elegoo Neptune 3 Pro, here are a few steps you can try to address the issue:

  1. Check your printer's belt tension: Make sure the belts that move the print head are properly tensioned. Loose belts can cause inaccurate movements and lead to layer lines. Adjust them according to your printer's guidelines.

  2. Lubricate the guide rods: Apply a thin layer of lubricant (such as sewing machine oil) to the guide rods. This will ensure smooth and consistent movement of the print head, reducing the chance of layer lines.

  3. Check for loose mechanical components: Ensure that all screws and nuts in your printer's frame and extruder assembly are tight. Loose parts can introduce unwanted vibrations and affect print quality.

  4. Adjust your slicing settings: Experiment with different layer heights. Sometimes, using a smaller layer height can help reduce layer lines. Also, ensure that the print speed is appropriate for your filament. Slo...

WARNING: This response is AI generated and may contain errors.
violet mauve
#

It's a Elegoo Neptune 3 pro i use the firmware that it comes with I tried different temps but nothing helped is it because my table its on is shaky

violet mauve
#

@vernal sable