#Layer variation and splitting

1 messages · Page 1 of 1 (latest)

hazy copper
#

Recently calibrated esteps, temp, retraction distance and speed, as well as tightening bolts and cleaning surfaces and dust.

Why do my prints always look like garbage? They have splits and they're weak and inconsistent. It's driving me insane 😦

20231020_191359.jpg
latent notchBOT
#
AI Help

There are several factors that could contribute to the issues you're experiencing with your prints. Here are a few possible reasons:

  1. Incorrect slicer settings: Ensure that your slicer software is set up correctly, including the layer height, infill density, print speed, and cooling settings. Additionally, double-check that the filament diameter is set accurately in the slicer.

  2. Filament quality: Poor quality or old filament can lead to inconsistent prints. Make sure your filament is clean, dry, and stored properly.

  3. Underextrusion: Insufficient material flow can cause weak and inconsistent prints. Check the extruder assembly for any blockages, make sure the nozzle isn't clogged, and confirm that the extruder gear is gripping the filament properly.

  4. Mechanical issues: Loose belts, misaligned rods, or a wobbly print bed can all result in poor print quality. Make sure all components are securely tightened and properly calibrated.

  5. Printer temperature: Printing at incor...

WARNING: This response is AI generated and may contain errors.