Strange Top layer | 3D Printing | Page 1

flint breach Oct 17, 2023, 3:37 PM

#

On the other thing not the cube it looks like the margines are separated by the inside idk how to explain properly

cerulean cradleBOT Oct 17, 2023, 3:37 PM

#

flint breach On the other thing not the cube it looks like the margines are separated by the ...

#

AI Help

It sounds like you're referring to the gaps or spaces between the different parts of your 3D print. These gaps can occur due to design issues or calibration problems with your printer. To address this, you can try adjusting the settings in your slicing software to ensure proper alignment and infill density. Additionally, make sure your printer's belts, pulleys, and rods are properly tightened to improve overall print accuracy. If the issue persists, feel free to provide more specific information or consult the user manual for your 3D printer model.

cerulean cradleBOT Oct 17, 2023, 4:39 PM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

flint breach Oct 17, 2023, 8:10 PM

#

This feels impossible to calibrate

#Strange Top layer