Cant figure out whats wrong with new SV06+ | 3D Printing | Page 1

sacred bloom Oct 14, 2023, 2:09 AM

#

My SV06+ arrived last sunday and I havent managed to get a single good print out of it since. I've dried my filament, increased retraction, calibrated esteps and turned off power loss recovery and it has done nothing.

distant nimbusBOT Oct 14, 2023, 2:09 AM

#

sacred bloom My SV06+ arrived last sunday and I havent managed to get a single good print out...

#

AI Help

I'm sorry to hear that you're experiencing issues with your SV06+ 3D printer. Let's try to troubleshoot the problem together. Here are a few suggestions:

Check the bed leveling: Make sure the bed is properly leveled and the nozzle is at the correct distance from the bed. If the first layer isn't adhering well, it can affect the overall print quality.
Filament quality: Even if you've dried your filament, it's possible that it's still causing issues. Try using a different spool or brand of filament to see if that improves the print quality.
Nozzle and extruder cleaning: A clogged nozzle or extruder can cause under-extrusion or poor print quality. Make sure to carefully clean both the nozzle and extruder assembly to ensure smooth filament flow.
Software settings: Review your slicer settings to ensure they are suitable for your SV06+ printer. Check the print speed, layer height, and temperature settings, as incorrect settings can impact the print quality.
Check the f...

sacred bloom Oct 14, 2023, 2:10 AM

#

ebon urchin Oct 14, 2023, 2:12 AM

#

You call that bad?

#

Its decent

#

Need to tune some things in cura and you should be good

sacred bloom Oct 14, 2023, 2:13 AM

#

Its not good

#

top layers are horrible

#

layer lines are very visible

#

and extremely rough

#

and there are blobs everywhere

ebon urchin Oct 14, 2023, 2:21 AM

#

For a printer that was built just now

#

Its decent

sacred bloom Oct 14, 2023, 2:24 AM

#

My problem is that I dont know how to fix it

ebon urchin Oct 14, 2023, 2:24 AM

#

sacred bloom My problem is that I dont know how to fix it

Cura settings

sacred bloom Oct 14, 2023, 2:25 AM

#

im not using cura

ebon urchin Oct 14, 2023, 2:25 AM

#

What slicer?

sacred bloom Oct 14, 2023, 2:25 AM

#

prusa

ebon urchin Oct 14, 2023, 2:25 AM

#

This your first time printing?

#

Or using a printer

sacred bloom Oct 14, 2023, 2:25 AM

#

nope

ebon urchin Oct 14, 2023, 2:25 AM

#

Ender 3 don’t count

sacred bloom Oct 14, 2023, 2:25 AM

#

But I had a fairly easy experience with the Ender 3 so I am lacking lots of knowledge

ebon urchin Oct 14, 2023, 2:26 AM

#

Try using cura

#

Its better

#

More reliable

distant nimbusBOT Oct 14, 2023, 3:28 AM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

#Cant figure out whats wrong with new SV06+