Resetting the center of the X-Axis | 3D Printing | Page 1

subtle tendon · 2023-09-18T01:51:32.409Z

I have a Creality Ender 3 Max Neo. I have the Sonic Pad and just installed the Sprite Extruder. When I finished installing the Sprite Extruder and did the auto homing, I found that the head is too far to the right when the printer thinks that it's centered on the x-axis. How do I reset where the center is for the x-axis?

AI Help

To reset the center of the X-axis on your Creality Ender 3 Max Neo, you can adjust the endstop position.

First, locate the X-axis endstop switch on your printer. It is typically positioned on the left side of the X-axis gantry, near the carriage.

To move the center of the X-axis, you need to adjust the position of this endstop switch. You can do this by loosening its mounting screws and sliding it along the X-axis rail. Adjust it until the printer head is properly aligned in the center according to your desired specifications. Once the adjustment is made, tighten the mounting screws securely.

After making this physical adjustment, you may need to recalibrate or modify the firmware settings to ensure the printer recognizes the new center position properly.

Note: It is important to turn off and unplug your printer before making any mechanical adjustments, and be cautious not to stress any cables or wiring during the process.

#Resetting the center of the X-Axis