#Ender 3, weird smooshed corners

1 messages · Page 1 of 1 (latest)

kind merlin
#

Hi, I haven't used my printer in like a year. Did a complete cleanup and leveling. Now it prints weird. Im not sure what print settings I used before. Right now I print 53mm/s with a layer height of 0.24mm and 1mm walls. I think those settings are similar as what I printed before.

I did upgrade the motherboard.

What could cause this behaviour on the images?

PXL_20230909_144846842.jpg PXL_20230909_144843405.jpg PXL_20230909_145258396.jpg
quiet patioBOT
#
AI Help

Based on the provided information, it is difficult to pinpoint the exact cause of the printing issues without further details or images. However, a few potential factors that may affect print quality include:

  1. Filament quality: Check if the filament is old or degraded. Older filaments may cause extrusion issues and affect the print quality.

  2. Nozzle clogging: Make sure the nozzle is free from any obstructions or filament residue. A clogged nozzle can lead to inconsistent extrusion and affect print quality.

  3. Incorrect extrusion temperature: Ensure that the extrusion temperature is suitable for the filament you are using. Different filaments require different temperatures, so check the manufacturer's recommendations and adjust accordingly.

  4. Belt tension and pulley alignment: Verify that the printer's belts are properly tensioned and that the pulleys are aligned. Loose belts or misaligned pulleys can result in skewed prints and poor dimensional accuracy.

  5. Z-axis alignment...

WARNING: This response is AI generated and may contain errors.
small rapids
#

Z offset

#

it’s too close

pulsar obsidian
kind merlin
kind merlin
pulsar obsidian
pulsar obsidian
kind merlin
pulsar obsidian
#

ender

kind merlin
#

It doesnt state it, Firmware 2

#

Ill lookup a video, got a lead now on what it could be. Thanks