#Klipper help needed plssss :)

1 messages · Page 1 of 1 (latest)

odd flowerBOT
#
AI Help

Of course, I can try to help you with setting up Klipper on your printer. However, please note that I may not be able to provide extensive assistance as it can be a complex process and may require specific knowledge about your printer model. Nevertheless, I'll do my best to guide you.

Regarding the guide you mentioned, it seems to be specific to the Sovol SV06 printer. To proceed with the Klipper setup, you'll need to download the OSS firmware listed in the guide. After downloading, you'll typically need to follow these steps:

  1. Extract the downloaded files, if necessary.
  2. Look for a firmware file with a .bin or .elf extension.
  3. Connect your 3D printer to your computer via USB.
  4. Install the necessary driver for your printer, if you haven't already.
  5. Open a terminal or command prompt on your computer.
  6. Navigate to the directory where you extracted the firmware files.
  7. Execute the command specific to your operating system to flash the firmware. For example, if you'r...
WARNING: This response is AI generated and may contain errors.
spiral hull
#

burh it deleted my msg

sterile swift
#

I can help

spiral hull
#

could you tell me what their talkin abt in that download OSS step

#

I cant even find those folders

#

litteraly no clue what it is

sterile swift
#

Quick question are you using a regular pi or an alternative?

spiral hull
sterile swift
#

great that will make things easy

#

do you have the pi imager?

spiral hull
#

just so you know

#

so far I have downloaded mainsail onto the pi sd card and now its a drive called boots with a whole bunch of stuff in it

#

and have done that first step up to right above downloading the OSS shi

spiral hull
sterile swift
#

are you able to talk rn?

spiral hull
#

sure ig

sterile swift
#

alright one moment

#

you should be able to join the channel I made

sterile swift
spiral hull
sterile swift
#

cd ~/klipper/
make menuconfig