CR-10 Smart Camera not loading in creality cloud

[grand bloom]

Kind of explained in the title. but i hooked a webcam to my CR-10 Smrt while it was off, then turned it on and waited about 5 minutes as creality cloud advises. But it just loads and never show me a live feed.

[flint sleet]

AI Help

If you have connected a webcam to your CR-10 Smart and it is not displaying a live feed, there are a few things you can try to troubleshoot the issue:

1. Double-check the webcam connection: Ensure that the webcam is securely connected to the correct port on your printer.

2. Verify webcam compatibility: Make sure that the webcam you are using is compatible with your CR-10 Smart. Check the printer's documentation or manufacturer's website for a list of supported webcams.

3. Check webcam settings: Access the printer's settings menu and look for options related to the webcam. Ensure that the webcam is enabled and configured correctly.

4. Power cycle the printer: Try turning off the printer, disconnecting the webcam, waiting for a few seconds, and then reconnecting the webcam. Power on the printer and see if the live feed displays now.

5. Software update: Check if there is any firmware or software update available for your CR-10 Smart printer. Sometimes, updating the printer's softw...

WARNING: This response is AI generated and may contain errors.

[grand bloom]

i checked all of these, except the compatibility. i cant find a compatibility list anywhere. but i have seen others using this same webcam on this printer

i have no mods on it

[flint sleet]

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

[grand bloom]

.

Please help at your earliest convenience

[flint sleet]

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

[grand bloom]

Anyone?