#Ender 3 Max Neo's auto-levelling failing

1 messages · Page 1 of 1 (latest)

green kestrel
#

Recently decided to get into 3D printing and got an Ender 3 Max Neo but I'm struggling with getting it ready for proper printing. The autolevel function constantly fails despite manually levelling the printer beforehand. Any help or suggestions would be great, I'd really love to get this thing up and running!

stable martenBOT
#
AI Help

I'm sorry to hear that you're experiencing difficulties with your Ender 3 Max Neo. When the autolevel function fails, there are a few things you can try:

  1. Double-check the manual leveling: Make sure that you have properly leveled the bed manually before running the autolevel function. Use a sheet of paper, feeler gauge, or a leveling tool to make sure the bed is even.

  2. Clean the bed surface: Ensure that the bed surface is clean from any debris or leftover adhesive. A dirty surface can cause inaccurate readings during autoleveling.

  3. Check the sensor: Ensure that the Z-probe sensor, responsible for autoleveling, isn't loose or damaged. Inspect the wiring to ensure it's connected properly.

  4. Update firmware: It's always a good idea to make sure you have the latest firmware installed on your printer. Check the manufacturer's website or online forums for any firmware updates specific to your printer model.

  5. Slow down the probing speed: In your printer's settings, try reduci...

WARNING: This response is AI generated and may contain errors.