Help bed mesh issue i think or idk | 3D Printing | Page 1

red nimbus Jul 23, 2023, 1:20 PM

#

the print mesh always changes a bit and it make me confusing and it also look so strange
https://cdn.discordapp.com/attachments/802921046452731944/1132659637435506828/image.png

steady stumpBOT Jul 23, 2023, 1:20 PM

#

red nimbus the print mesh always changes a bit and it make me confusing and it also look so...

#

AI Help

It looks like the mesh of your 3D print is not coming out as expected. There could be a few possible reasons for this problem:

Model issues: Check if your 3D model has any errors or inconsistencies. Make sure it is a solid manifold and doesn't have any overlapping or intersecting parts.
Slicer settings: Review the settings in your slicer software. Ensure that the layer height, infill density, and wall thickness are appropriate for your desired print quality. Also, check for any specific settings related to mesh preservation or smoothing that might be affecting the output.
Model orientation: Experiment with different orientations for your model. Sometimes, changing the orientation can improve the print quality and reduce distortions.
Mechanical issues: Inspect your printer for any loose parts, misalignment, or issues with the belts and motors. Make sure your printer is properly calibrated.
Material issues: The type and quality of filament used can have an impact o...

red nimbus Jul 23, 2023, 1:20 PM

#

Help bed mesh issue i think or idk

#

i did it again no change it it changes again

#

#

i am confused

fresh pivot Jul 23, 2023, 1:52 PM

#

What printer U got

#

@red nimbus

red nimbus Jul 23, 2023, 1:52 PM

#

sovol sv06

fresh pivot Jul 23, 2023, 1:53 PM

#

Run PROBE_CALIBRATE 500 and give me the results

red nimbus Jul 23, 2023, 1:53 PM

#

alright

#

fresh pivot Jul 23, 2023, 1:54 PM

#

Does it probe the bed?

red nimbus Jul 23, 2023, 1:54 PM

#

yup

#

i click the create bed mesh macro and it probes

fresh pivot Jul 23, 2023, 1:55 PM

#

Don't do that

#

I need to see if the probe is shit

red nimbus Jul 23, 2023, 1:55 PM

#

gosh so so what should i do now

fresh pivot Jul 23, 2023, 1:55 PM

#

Is the probe probing a lot

red nimbus Jul 23, 2023, 1:56 PM

#

yup 7x7

fresh pivot Jul 23, 2023, 1:56 PM

#

Should probe the bed 500 times in the middle

#

Not meshing

red nimbus Jul 23, 2023, 1:56 PM

#

ohhh sorry

#

i misunderstood

#

i dont think i have a macro for that

fresh pivot Jul 23, 2023, 1:57 PM

#

Try run PROBE_ACCURACY 500

#

After the mesh

fresh pivot Jul 23, 2023, 1:57 PM

#

red nimbus i dont think i have a macro for that

It's not a macro, it's built into klipper

red nimbus Jul 23, 2023, 1:58 PM

#

alright so i click do mesh again and then i do this PROBE_ACCURACY 500

fresh pivot Jul 23, 2023, 1:58 PM

#

red nimbus alright so i click do mesh again and then i do this PROBE_ACCURACY 500

No

#

Just run the command

#

No mesh

red nimbus Jul 23, 2023, 1:59 PM

#

alright

fresh pivot Jul 23, 2023, 1:59 PM

#

Where did I mention mesh

#

At all

red nimbus Jul 23, 2023, 1:59 PM

#

oh yeah sorry 😦

#

fresh pivot Jul 23, 2023, 1:59 PM

#

Nah don't worry, just messing with you

#

Hmm

#

Just run PROBE_ACCURACY then

#

No number

red nimbus Jul 23, 2023, 2:00 PM

#

it works

#

its probing in them middle

fresh pivot Jul 23, 2023, 2:00 PM

#

Good

red nimbus Jul 23, 2023, 2:01 PM

#

fresh pivot Jul 23, 2023, 2:01 PM

#

Hmm okay

#

So the probe is fine

#

Has the bed heated up or are you heating up/cooling down the bed while doing these probe tests?

red nimbus Jul 23, 2023, 2:02 PM

#

yup

#

it is heated

#

60 degrees celsius

#

oh no wait when i did this i forgot to heat up

#

let me do it again

#

heated

fresh pivot Jul 23, 2023, 2:04 PM

#

Let it heat soak for like 2 or 3 mins

red nimbus Jul 23, 2023, 2:04 PM

#

okk got it

fresh pivot Jul 23, 2023, 2:06 PM

#

Okay now mesh the bed twice or thrice to see if it's wildly different

red nimbus Jul 23, 2023, 2:08 PM

#

alright

#

so first mesh

#

now i will do it again

#

second one looks different

#

now i will do again

#

and normally this will be different too

#

#

the red is like a plague

#

i hit it again just to see if this bubonic plague extends

#

steady stumpBOT Jul 23, 2023, 3:31 PM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

red nimbus Jul 23, 2023, 3:32 PM

#

I think I fixed it

floral egret Jul 23, 2023, 4:19 PM

#

How?

red nimbus Jul 23, 2023, 4:22 PM

#

nvm i thought it fixed but the bed mesh still changes

#Help bed mesh issue i think or idk