#2/3 printers failed in matching style, ender 3 S1 pro/ ender 5 plus

1 messages · Page 1 of 1 (latest)

neon sluice
#

2/3 printers failed to what seems the same way, could it be problem in eletricity

Ender 5 plus- changed hot end, bauben tube, the metal fillament extruding motor gear with clamp thing

Ender 3 S1 pro just bought it. after cleaning pei sheet with rubbing alchochol it seems to lost its grip

received_183087371425638.jpg received_801763771534403.jpg
sand axleBOT
#
AI Help

It's possible that the electrical issue could be causing problems with your printers, especially if two of them failed in a similar manner. However, there could be other factors at play as well.

For the Ender 5 Plus, changing the hot end, Bowden tube, and extruder gear with clamp is a good troubleshooting step. Make sure all connections are secure and double-check the wiring to rule out any electrical issues. It's also worth examining the power supply and ensuring it's providing stable power to the printer.

Regarding the Ender 3 S1 Pro, cleaning the PEI sheet with rubbing alcohol shouldn't cause it to lose grip. However, it's important to avoid using too much alcohol as it can degrade the surface over time. You can try lightly sanding the PEI sheet with fine-grit sandpaper to restore its grip. If that doesn't work, consider replacing the PEI sheet.

If you continue to experience issues, it might be helpful to provide more specific details about the problems you're facing, such as...

WARNING: This response is AI generated and may contain errors.
quiet marten
#

seems to be just bed adhesion problems

neon sluice
quiet marten
#

errr, yes?

#

What filament?

neon sluice
#

Pla

#

225/70 first player on ender 5

quiet marten
#

have you cleaned your surface?

neon sluice
#

Then 220/65

#

Yes

quiet marten
#

with?

neon sluice
#

Rubbing alchochol

quiet marten
#

errrr

#

try washing with dish soap

#

should get rid of the oils

quiet marten
neon sluice
hot perch
#

Soap binds with oil, alcohol doesnt

quiet marten
#

IPA will break down oil, yes, but IME, dish soap is more effective

neon sluice
#

Btw ender 5 glass bed, ender 3 stock magnet pei sheet

#

Does that make a differents also with what to use cleaning?

hot perch
#
  • no
neon sluice
#

Okay thank you, ill try that

quiet marten
#

PLA doesn't stick to textured PEI as much as smooth PEI/glass

#

It should still work, just needs a bit more squish

neon sluice
#

Ender 3 seems to made 2 layers before failing, ender 5 bit more but it was 42 different parts with supports so i guess fail rate is bigger

quiet marten
#

you could be overextruding and your nozzle is hitting the parts

neon sluice
#

Who could have tought that running 3 printers with 2weeks knowledge would be su nightmare

quiet marten
#

that'll be less likely to happen

neon sluice
hot perch
#

I think it's just a difficult print ngl, 40+ prices with supports is crazy

neon sluice
#

Well the ender 3 had 9 pieces no spports preety large initial layer area to get a grip