#Weird sound from extruder, Ender 3 V2

1 messages · Page 1 of 1 (latest)

tired lark
#

Hey guys, I hope you are doing well

I have ender 3 v2 that makes weird sounds from the extruder, see the video

What's the issue?

simple gorgeBOT
#
AI Help

Hi there! Sorry to hear about the issue with your Ender 3 V2. Without the video, it's a bit difficult to pinpoint the exact problem, but there can be a few reasons for strange sounds from the extruder.

Here are a few common issues to check:

  1. Filament Tension: Make sure the filament is properly loaded and that the tension on the extruder is not too tight or too loose.
  2. Clogged Nozzle: There might be some debris or a partial clog in the nozzle. Try cleaning it with a nozzle cleaning needle or by performing a cold pull procedure.
  3. Misaligned Gears: Check if the gears in the extruder assembly are properly aligned and not slipping or grinding against each other.
  4. Belt Tension: Ensure that the belts in your printer are properly tensioned.
  5. Loose Parts: Double-check if any screws or components on the extruder assembly are loose.

If none of these suggestions resolve the issue, please feel free to share the video so that we can provide more targeted assistance.

WARNING: This response is AI generated and may contain errors.
tired lark
#

Apparently the nozzle was clogged 😆
Thanks AI