#Modded Ender 3 Problem

1 messages · Page 1 of 1 (latest)

proper perch
#

I have an Ender 3 and changed the mainboad (a year ago or so?) and now i recently changed the Display and the extruder plus i put a cr touch on it. I went from Bowden to Direct drive. Since then i cant get any print done. The first few layer are great and then it does a offset to the left and i dont know why. The Bed is level and i checked all belts and Steps plus the Z offset. I also tried to slice with cura, first i sliced with Prusa, but that didnt really help. I tryed it for the last 2 weeks now to get this fixed but i cant get it fixed. I appreciate every help!

I influde a Pictures form a print that i stopped. The pictures are from top and bottom side.

IMG_5078.jpeg IMG_5079.jpeg IMG_5080.jpeg IMG_5081.jpeg
sly galeBOT
#
AI Help

From the pictures you shared, it looks like you are experiencing a shift in the X-axis, which means that the print head is moving to the left during the print. Here are a few things you can try to fix this issue:

  1. Check your X-axis belt tension: Make sure the belt is properly tightened and not slipping. A loose belt can lead to a shift in the X-axis.

  2. Check your X-axis endstop: Make sure the X-axis endstop is properly aligned and not triggering too soon or too late. If it triggers too soon, the printer will assume that the print head has reached the end of the X-axis and move to the next layer, causing a shift.

  3. Check your slicer settings: Make sure you have the correct print dimensions and offsets set in your slicer. Incorrect slicer settings can cause the print head to move in the wrong direction, causing a shift.

  4. Check your motor connections: Make sure the X-axis motor and stepper driver are properly connected and functioning. A malfunctioning motor or driver can cau...

WARNING: This response is AI generated and may contain errors.
proper perch
#

Modded Ender 3 Problem