Low camera FPS, Klipper

[tepid yew]

In the past week for some reason my camera feed from klipper has been extremely laggy, even sometimes freezing..
The cpu and memory usage on machine seems completely fine and normal.. Any ideas on what may be the cause for something like this to occur

[sacred cliff]

AI Help

There could be several reasons why the camera feed from Klipper is laggy or freezing. Here are some possible causes and solutions:

1. Network connectivity: If you are streaming the camera feed over a network, check if the connection is stable and fast enough. You can try connecting the camera directly to the computer running Klipper to eliminate network issues.

2. Camera settings: Check if the camera settings are optimized for streaming. You can reduce the resolution or frame rate to reduce the load on the system.

3. Klipper settings: Check if the Klipper settings for camera feed are configured correctly. You can try increasing the buffer size or reducing the delay to improve the streaming quality.

4. Hardware issues: Check if the camera or the computer hardware is malfunctioning or outdated. You can try updating the drivers or replacing the hardware.

If none of these solutions work, you can try posting your issue in Klipper user forums or seeking help from an expert.

WARNING: This response is AI generated and may contain errors.

[wet merlin]

Network latency or throughput can also cause issues with this

See if you can view the webcam footage from the computer/board that runs klipper itself