#Help with PETG Printing

1 messages · Page 1 of 1 (latest)

errant heart
#

Hello, I've been printing for a bit now with PLA, but this is the first time I'm doing general printing with PETG. It looks like I've been decently successful so far, but it could definitely use some refinement. Is there anything people can see in my pictures or settings that could be improved? I'll attach pictures of both the prints and my Cura settings.
Thanks for any help!

20230607_081217.jpg 20230607_002317.jpg Screenshot_2023-06-07_002723.png Screenshot_2023-06-07_002743.png Screenshot_2023-06-07_002757.png Screenshot_2023-06-07_002811.png
plush impBOT
#
AI Help

Hello! Unfortunately, it seems that you forgot to attach the pictures and Cura settings. Can you please resend them so I can take a look and provide some feedback? Thank you!

WARNING: This response is AI generated and may contain errors.
errant heart
#

I'm assuming AI is wrong since I can see the pictures, but if other people can't please tell me and I'll resend them!

teal elm
#

I can see the pictures too

#

Can't help though, I've never printed with PETG before. Although the print looks pretty good.

#

At least in the first picture.

plush impBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

errant heart
#

Also if anyone has some retraction reccomendations for PETG?

gilded juniper
gilded juniper
errant heart
gilded juniper
gilded juniper
errant heart
gilded juniper