leveling help with BL touch | 3D Printing | Page 1

rugged stratus Jun 2, 2023, 3:50 AM

#

How you? So I got a couple mods done on my 3D printer. It's a Ender 3v2. I got someone else to do it cuz I was not confident to do it myself but now I'm about to use it but I got it done probably about 4 or 5 months ago but I'm about to go use it how do I make sure it is level? They also put some custom software for the PL touch on the printer but I don't really know how to use it

stone sonnetBOT Jun 2, 2023, 3:50 AM

#

rugged stratus How you? So I got a couple mods done on my 3D printer. It's a Ender 3v2. I got s...

#

AI Help

The first step in ensuring that your 3D printer is level is to make sure that the build plate is at the right distance from the print nozzle. You can do this by using a sheet of paper thin enough to fit between the nozzle and the build plate. Once the printer is turned on, position the print head at the center of the bed and slide the paper under the nozzle. The paper should offer some resistance but still slide without tearing.

The second step is to use the custom software for the PL touch to auto-level the printer. You can do this by connecting the printer to your computer and opening the software. Follow the instructions on how to perform the auto-leveling process using the PL touch.

If you have any further questions about your printer or need help with troubleshooting, feel free to ask.

rugged stratus Jun 2, 2023, 4:34 AM

#

The mods on my 3D printer are better thing to insert filaments titanium springs and a PEI magnetic bad

#

That's everything besides the BL touch

#

also forgot to add i do have a harden steal hot end

stone sonnetBOT Jun 2, 2023, 5:53 AM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

rugged stratus Jun 2, 2023, 5:53 AM

#

noo

#leveling help with BL touch