#colour banding with multi colour filaments

1 messages · Page 1 of 1 (latest)

fossil epoch
#

Hey guys, anyone got much experience with multicolored filaments? The one on the far left has some odd color banding, any ways to avoid that? Same happened in the 2nd from the right in the other printer. The actual print came out fine, just the colours didn't go how I thought they would.

PXL_20230527_081106197.jpg PXL_20230527_081327185.jpg
thorn lanceBOT
#
AI Help

Color banding can be caused by a number of factors, including the filament quality, printing speed, temperature, and printer settings. To avoid color banding, try the following:

  1. Check the quality of the filament. Sometimes, poor quality filaments can cause color banding.

  2. Make sure you are printing at a speed that is suitable for the filament. If you are printing too fast, it can cause color banding.

  3. Adjust the printer temperature to suit the filament. If the temperature is too high or too low, it can cause color banding.

  4. Check your printer settings, like the layer height and nozzle diameter. If these are not suitable for the filament, it can cause color banding.

If none of these solutions work, try experimenting with other multicolored filaments to see if the problem persists.

WARNING: This response is AI generated and may contain errors.
white veldt
#

its most likely your filament is turning as its printing

fossil epoch
#

Any way to stop that happening?