#ender 3 print temp

1 messages · Page 1 of 1 (latest)

hoary herald
#

my ender 3 pro is not able to get to print temp. on matter at what temperature i set it at it always stays about 10 degrees away form it; I have tried to slice it will 100 an the nozzle wouldn't get above 192 and then i sliced it at 207 and it wouldn't get above 198. Does anyone know how to fix this problem.

solar steppeBOT
#
AI Help

There are a few things you can try to fix this issue:

  1. Check the connections between your printer and the temperature sensor. They may be loose or disconnected, causing inaccurate readings.

  2. Check that your thermistor is functioning properly. You can do this by testing the resistance with a multimeter.

  3. Try updating your firmware to the latest version. This may help calibrate your printer's temperature readings.

  4. Inspect the heater cartridge as it could be damaged or not seated properly.

If none of these solutions work, you might need to replace the temperature sensor or the heater cartridge.

I hope this helps!

WARNING: This response is AI generated and may contain errors.