#weird wall issue

1 messages · Page 1 of 1 (latest)

earnest horizon
#

Anyone who can tell me what exactly this is? And what might cause it? It seemed to only happen at the z-seam

rn_image_picker_lib_temp_7ca8bf48-ca37-48c3-ba21-dffffc5e5b13.jpg rn_image_picker_lib_temp_3b8e1275-210a-4dcf-b6ac-eb4ad36b0ae5.jpg
abstract frostBOT
#
AI Help

Without knowing exactly what "this" refers to, it is difficult to provide a specific answer. However, if the issue only occurs at the z-seam (where the layers start and end), it could be related to the retraction settings or the positioning of the seam. Adjusting the retraction settings (distance and speed) and/or trying a different positioning of the seam may help to improve the issue. It may also be useful to provide more information, such as a photo or more detailed description of the problem.

WARNING: This response is AI generated and may contain errors.
earnest horizon
#

Im not sure if it has to do anything with retraction settings, but maybe.
Some additional info is that i used 0.4mm walls and 10% infill