#SD init fail

1 messages · Page 1 of 1 (latest)

sly bay
#

(kinda solved) i'm trying to update my SV06 but i get SD init failed. if i take the SD out and put it back in it gets recognized, but if i try turning the printer off and back on with the SD inside it fails again. it's a new sandisk 32gb card. formatted it in fat32 4096 allocation size, tried partitioning it to 8gb too.
this happens regardless of what is inside the sd card

near radishBOT
#
AI Help

It seems like there could be an issue with the compatibility of the SD card you are using with your printer.

One possible solution is to try using a different SD card that is known to be compatible with your specific printer model. You could also try formatting the SD card using a different file system such as exFAT or NTFS and see if that resolves the issue.

If the issue persists, it may be a hardware problem with the printer's SD card reader or firmware. In this case, you may need to contact the manufacturer for assistance or take your printer in for repairs.

WARNING: This response is AI generated and may contain errors.
sly bay
#

formatted the card to 4gb, now it's stuck on a blank screen

#

flashing with the stock SD card worked fine. lol

near radishBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.