#Railroad vibration and 3d printing?

1 messages · Page 1 of 1 (latest)

old matrix
#

hey guys i got a question for you. I've been wanting a 3d printer for a long time now and was just waiting to have more space which is finally the case (YEAH). But while browsing the 3d printers i thought about a possible issue. I live pretty close to a railroad, we can feel everything shake when train pass. No issue for me, but this will probably screw up the printing process? If it does, what could/should i do?

signal bearBOT
#
AI Help

Hello! The vibrations from the railroad may cause some issues with the printing process, such as layer shifting or inconsistent layer height. To mitigate this, you could try placing the 3D printer on a heavy, sturdy surface, such as a concrete floor or a large wooden table, to absorb some of the vibrations. You could also try placing some foam or vibration dampening pads under the printer to further reduce the impact of the vibrations. Another option would be to enclose the printer in a soundproof box to help isolate it from the vibrations. Finally, you could try printing at lower speeds and reducing the acceleration and jerk settings in your slicer to help prevent layer shifting.

WARNING: This response is AI generated and may contain errors.
signal bearBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

umbral lake
#

In real life, that’ll probably do absolutely nothing to your prints unless those trains rumble straight through your room.
But if it does show up in prints, do what the bot says and put the machine on some vibration dampening pads.

old matrix
umbral lake
#

To a certain degree, they are. Just try it. Worst case, just put the thing on a concrete slab on a rubber pad.

thorny chasm
#

i got a kinda similar scenario, harvesters and hugeass tractors drive by my house on the bumpy road

#

can feel the table lightly shaking but the printer shrugs it off