print/bridging settings

[willow tiger]

i am trying to do my bridging test and i want to know what the optimal settings should be for the best bridging on the ender 5 pro 3d printer with no mods just stock

[robust tulip]

AI Help

To get the best bridging performance on the Ender 5 Pro without any hardware modifications, it is important to use a combination of the right settings and techniques. Here are some recommended settings:

1. Print speed: The optimal print speed for bridging on the Ender 5 Pro is 40mm/s.

2. Layer height: The optimal layer height for bridging on the Ender 5 Pro is 0.2mm.

3. Infill density: Use at least 15-20% infill density for bridging.

4. Temperature: The optimal temperature is around 215-220°C for PLA filament.

5. Cooling: Always enable cooling while printing.

6. Support: Avoid using support structures while bridging.

7. Retraction: Retraction settings should be kept to a minimum, as too much retraction can cause stringing.

8. Print bed temperature: Keep the bed temperature between 50-60°C.

Follow these settings and you should be able to achieve good results. However, keep in mind that printing bridges without any sagging or drooping can be challenging at times and ma...

WARNING: This response is AI generated and may contain errors.