#Bambu Lab P1P Run out BUG!!!

1 messages · Page 1 of 1 (latest)

slim vale
#

Hi guys i had some leftover filaments and want to use them for small prints. Unfortunately everytime it is failing and cant start the print again

in the time lime happening like that

  • Filaments run out and the head parked on top of the cleaning area
  • I click back button on the printer to get in "Feeding"area
  • I clicked the Load button
  • Loaded just fine
  • After that going to the first menu page and hit start button again.
  • Printer doing nothing peepoclown
Ekran_goruntusu_2023-05-04_183349.png
alpine daggerBOT
#
AI Help

It sounds like your printer is not recognizing the newly loaded filament. Here are some possible solutions:

  1. Check that the filament is feeding properly. Make sure there are no knots or kinks in the filament that could be preventing it from feeding correctly.

  2. Check that the nozzle is clear. If the nozzle is clogged, it won't be able to extrude the plastic.

  3. Make sure that the filament diameter is set correctly in your printer software. If your filament is 1.75mm and you have it set to 3mm, for example, your printer won't recognize it.

  4. If none of these solutions work, try resetting your printer and repeating the loading process.

I hope this helps! Let me know if you have any other questions.

WARNING: This response is AI generated and may contain errors.
alpine daggerBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

slim vale
#

sad