ended 3S1

[hexed cedar]

Does anyone experience issues with the Creality Ender 3S1? Once I heated up the bed and began printing, the nozzle and bed temperatures suddenly dropped to zero. Can someone please advise me on how to solve this problem? Thank you.

[snow drift]

AI Help

There could be several reasons why your printer's nozzle and bed temperatures dropped suddenly to zero. Here are some solutions to try:

1. Check the connections of the thermistor and heating element in your printer's control box. Make sure that they are properly secured and not damaged.

2. Check the wires for any damage or loose connections, and ensure that they are seated correctly in the connectors.

3. Verify that the firmware on your printer is up to date, as outdated firmware can result in issues with temperature regulation.

4. Ensure that the power supply is providing the correct voltage to your printer.

5. Check your printer's PID settings to make sure they are tuned correctly.

6. If the above steps don't help, try replacing the thermistor or your printer's heating element.

If you're not comfortable with making these changes, you should reach out to the manufacturer or a qualified service technician for assistance.

WARNING: This response is AI generated and may contain errors.

[snow drift]

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

[arctic salmon]

are the wires to the heater cartridge and the thermistor properly plugged in on both ends?

is there anything that might snag/unplug the wires when the hotend starts moving?