#Ender 3v2 stops mid print, retracts back the filament a alot and starts beeping

1 messages · Page 1 of 1 (latest)

onyx bison
#

Hi, I've had my ender for a couple of months and yesterday this started happening. tried multiple prints, with 2 different SDs and still this happens
can someone help me understand what is causing this?

scarlet raftBOT
#
AI Help

It looks like there may be an issue with your printer's extrusion or filament feed system. A few things you can check include:

  1. Make sure your filament is not tangled or knotted - this can cause uneven extrusion and blockages.
  2. Check your extruder gear to make sure it is clean and free of any debris.
  3. Check your hotend to make sure it is free of any clogs or obstructions.
  4. Try adjusting the temperature and speed settings in your print software to see if that helps.
  5. Make sure your printer nozzle is not too close to the bed, which can cause extrusion issues.

If you've already tried these steps and are still having trouble, let me know and we can troubleshoot further.

WARNING: This response is AI generated and may contain errors.
onyx bison
#

I forgot to mention the slicer is prusa 2.6

dusky relic
#

And have you tried to format your SD cards

onyx bison
onyx bison
dusky relic
onyx bison
#

will do, and report back in 10~ minutes
how do I find out what firmware?

dusky relic
#

Goto about printer in your settings

I'm guessing you haven't changed the firmware before then?

onyx bison
#

nope, and it's 1.0.4

tribal sparrow
#

send your sliced gcode, looks like a filament change script or something

onyx bison
dusky relic
#

If you decide to update your firmware, There are lots of videos on youtube to help you through it!

tribal sparrow
#

you do have a filament gcode in there, something added a M600

scarlet raftBOT
#

M600
https://marlinfw.org/docs/gcode/M600.html

Marlin Firmware
Filament Change

The M600 command initiates the filament change procedure. The basic procedure will move the print head away from the print, eject the filament, wait for new filament to be inserted and the user to confirm, load and prime the filament, and continue with the print. M600 may be initiated automatically if a filament runout sensor is installed.

dusky relic
tribal sparrow
#

kinda a givaway with how much retraction was in the video

onyx bison
onyx bison
dusky relic
tribal sparrow
#

for firmware if that is a 3v2 you can use insanity automation or jyers if you want a prebuilt, marlin is something you configure for yourself

onyx bison
# dusky relic https://marlin.crc.id.au I use this firmware.

thanks, but can I ask you one more thing that's confusing me?
in the latest version there, v4.2.2 Board- Stock they seem to have added a M600 command, the one I just learned about
how come it was just added there and my 1.0.4 firmware recognizes that command?
Is it just that Marlin is built from the ground up, or something like that?

onyx bison
tribal sparrow
#

marlin is like 10 to 1000 things to configure, depends on how much functionality you want, like the M600 needs a ADVANCED_PAUSE_FEATURE flag, https://marlinfw.org/docs/gcode/M600.html

Marlin Firmware
Filament Change

The M600 command initiates the filament change procedure. The basic procedure will move the print head away from the print, eject the filament, wait for new filament to be inserted and the user to confirm, load and prime the filament, and continue with the print. M600 may be initiated automatically if a filament runout sensor is installed.

onyx bison
#

?solved