Help With Picking Budget parts

[exotic terrace]

Hi, Im trying to make myself a voron stealthburner, but want to get the most budget parts possible. I would really appreciate if someone could help me with this.
For my build Im using a FYSETC kit, a dragonfly bmo, and an already purchased BL touch, those parts arent going to change.

The parts I have to find that arent included in the kit are:

• 24V ~50w Heating Cartridge and Thermistor
• A PCB that can connect all the parts I need
• Whatever receptors I need to connect my pcb to my motherboard
• 24AWG PTFE Cable
• Black 1.75MM ABS Filament (Dont need much)
• And a 5 meter timing belt (6mm in width)

I plan to connect all the electronics of the Stealthburner to the PCB (located on the stealthburner) and have a 1 or 2 wires leading to the back of my printer where my motherboard is (to be safe, around 2 meters is preferable)

Ill also link my current parts list in another message

Sidenote: Im young, and my parents only like ordering from amazon, so if possible please provide links for amazon :)

[sturdy canyon]

AI Help

Sure, I'd be happy to help you find budget-friendly parts on Amazon for your Voron Stealthburner build. Here are the links to the parts you're looking for:

• 24V ~50w Heating Cartridge: https://www.amazon.com/dp/B07SXC5FY5/
• Thermistor: https://www.amazon.com/dp/B07PQLFNG6/
• PCB: https://www.amazon.com/dp/B07WYSK8GM/
• Receptacles for PCB to motherboard connection: https://www.amazon.com/dp/B07TSCMKDX/
• 24AWG PTFE Cable: https://www.amazon.com/dp/B07W1JH2QG/
• Black 1.75MM ABS Filament: https://www.amazon.com/dp/B00MJ9LH74/
• 5 meter timing belt (6mm width): https://www.amazon.com/dp/B07FZLPBMW/

I hope this helps and let me know if you have any other questions!

WARNING: This response is AI generated and may contain errors.

[exotic terrace]

Current Parts List:

Printer Parts Voron Stealthburner Extruder Head $50 https://www.amazon.com/FYSETC-Stealthburner-Extruder-Compatible-Switchwire/dp/B0BCKL3JWM/ref=sr_1_5?crid=2SS33HZ475TRV&keywords=VORON+STEALTHBURNER&qid=1680664535&sprefix=voron+stealthburne%2Caps%2C180&sr=8-5

DragonFly Hotend BMO $64 https://www.amazon.com/Dragon-Printer-Compatible-Extruder-Creality/dp/B08MF9NPMT/ref=sr_1_3?crid=2NZTZRUZXBS1T&keywords=DragonFly%2BHotend%2BBMS&qid=1680742020&sprefix=dragonfly%2Bhotend%2Bbms%2Caps%2C377&sr=8-3&th=1

24V 500c Heating Cartridge & Thermistor $12 https://www.amazon.com/Catridge-Thermistor-Temperature-Compatible-Printer/dp/B0B5DRBXZP/ref=sr_1_7?crid=2I1CC27PJIKY5&keywords=24V+heater+cartridge+e3d+v6&qid=1680744702&s=industrial&sprefix=24v+heater+cartridge+e3d+v%2Cindustrial%2C147&sr=1-7#customerReviews

AfterBurner Toolhead PCB $15 https://www.amazon.com/Afterburner-Toolhead-Compatible-extruder-Stealthburner/dp/B0BG1LJK8K/ref=sr_1_2?crid=UYHZONMDAMZD&keywords=stealthburner+toolhead+pcb+with+probe&qid=1680833101&sprefix=stealthburner+toolhead+pcb+with+prob%2Caps%2C129&sr=8-2

Molex Micro-Fit 3.0 Dual Row (14 Circuits) Male Receptacle Plug $9 https://www.amazon.com/Molex-Micro-Fit-Circuits-Receptacle-Terminal/dp/B0799FS2PH/ref=sr_1_3?crid=35PRD0C4O4MGR&keywords=dual+row+(14+circuits)+MicroFit3+Connector+Receptical&qid=1680833589&sprefix=dual+row+14+circuits+microfit3+connector+receptical%2Caps%2C131&sr=8-3

Molex Micro-Fit 3.0 Dual Row (2 Circuits) Male Receptacle Plug $7 https://www.amazon.com/Molex-Circuits-receptacle-Terminal-Micro-Fit/dp/B078Q5CC3P/ref=sr_1_42?crid=335BJZOJA0KI0&keywords=dual+row+MicroFit3+(2+circuits)+receptical&qid=1680834203&sprefix=dual+row+microfit3+2+circuits+receptical%2Caps%2C132&sr=8-42

24 Gauge Stranded Electrical Wire $8 https://www.amazon.com/Fermerry-Silicone-Flexible-Electric-Stranded/dp/B089CRSLG8/ref=sr_1_4?crid=10CVV5P3A8VUE&keywords=24%2Bawg%2Bsilicone%2B1.5m%2Bwire&qid=1680834499&sprefix=24%2Bawg%2Bsilicone%2B1.5m%2Bwire%2Caps%2C153&sr=8-4&th=1

ABS Filament 1.75mm $20 https://www.amazon.com/OVERTURE-Filament-Consumables-Dimensional-Accuracy/dp/B087LW1YP3/ref=sr_1_6?crid=3NK256M1GBNEH&keywords=1.75mm%2Bblack%2Babs&qid=1680834653&sprefix=1.75mm%2Bblack%2Bab%2Caps%2C138&sr=8-6&th=1

5M GT2 Timing Belt (maybe later) $13 https://www.amazon.com/Upgrade-Non-Slip-Version-Printer-Printers/dp/B08R93QQ8Z/ref=sr_1_8?crid=2LLERNARL1IDB&keywords=gates%2Bbelts%2Bprusa%2Bmk3&qid=1680836185&sprefix=gates%2Bbelts%2Bprusa%2Bmk%2Caps%2C142&sr=8-8&th=1

[terse cape]

those belts aren't the best, but you can't get any better on just amazon

so that's all you need, and probably the cheapest you'll get

[exotic terrace]

D:

Im mainly looking to maybe find more budget parts for the dual row (2 circuits) receptacle, dual row (14 circuits) receptacle, the abs filament, and the wire

[terse cape]

are you just going to put it on your taz 6?

[exotic terrace]

yep

[terse cape]

do you have a mod to install it onto rods instead of a rail?

[exotic terrace]

yeah, Im planning to design one and already have the parts

I just need to make it somewhat compatible with my old toolhead (I have a lot of 2.85mm filament), and I have the proper ball bearing sliders for my bars

[sturdy canyon]

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

[dire mist]

Why dragonfly bmo?

Also afterburner pcb doesnt work with stealthburner

Also also u need the wiree (the expensive bit$

[sturdy canyon]

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

[exotic terrace]

budget option, decent flow

[dire mist]

Its not that budget and the flow is meh at best

Maybe look at an nf crazy?

[exotic terrace]

im fairly certain they mentioned it works with both

[exotic terrace]

how much?

[exotic terrace]

im pretty sure i included it in the list

[dire mist]

Oh your doing canbus

My bad

You have the bus on the board side?

[exotic terrace]

no crazy nf isnt sold on amazon @dire mist

[dire mist]

Message mellow on aliX

[exotic terrace]

wdym? im attaching it to the side of the stealthburner

[exotic terrace]

i dont use ali

[dire mist]

Can you send the pcb link im on mobile

Ill check it out

[dire mist]

If its can you need a can encoder/decoder board side

If its can

But i cant see the links are just a block of texy

[exotic terrace]

https://www.amazon.com/Afterburner-Toolhead-Compatible-extruder-Stealthburner/dp/B0BG1LJK8K/ref=sr_1_2?crid=UYHZONMDAMZD&keywords=stealthburner+toolhead+pcb+with+probe&qid=1680833101&sprefix=stealthburner+toolhead+pcb+with+prob%2Caps%2C129&sr=8-2

[exotic terrace]

sorry i just like it compact lol

[dire mist]

Yeah cables aint included

[exotic terrace]

ik

thats what the molex clips and 24awg wire is for

[dire mist]

If your planning on crimping yourself good luck sir

Btw, use ptfe cables

[exotic terrace]

thanks 😭

[exotic terrace]

best i can find :(

[dire mist]

Hrmm alright

You got a crimping tool?

Btw i think preceimped will be better for you

The fystec one is really cheap

THB 868.57 39％ Off | FYSETC SB Stealthburner Toolhead PCB Board by Hartk Extruder Print Head PCB Kit For Voron 2.4 R2 Trident 3D Printer Parts
https://a.aliexpress.com/_mNmdDMg

[exotic terrace]

fairly certain, but i think you can do it without still

[dire mist]

You will spend days without one lol

Precrimped is more cost effective anyways

[exotic terrace]

i mentioned in original post that i can only order from amazon :(

[dire mist]

Also get that nf crazy

[exotic terrace]

cant, as i said

[dire mist]

Hrmm alright D:

Well its the only good source of cheap quality printer parts pretty much

Try convince them if u can

[exotic terrace]

ive tried

btw, do yk anywhere i can get precrimped clips?

and im pretty sure my parts list includes proper wire @dire mist

[dire mist]

https://www.amazon.com/Motherboard-Electronics-Hardness-Stealthburner-Toolhead/dp/B0BN65931W/ref=mp_s_a_1_3?crid=2Y152TGBI4TLT&keywords=voron+stealthburner&qid=1680875309&sprefix=voron+steal%2Caps%2C1253&sr=8-3

Expensove but is what it is

More cost effective then buying seperately still tho

Also if you can i would make the jump to a hf dragon

[exotic terrace]

i dont think its very cost effective-

brb

what gauge?

[dire mist]

Wdym

[exotic terrace]

of wire

[dire mist]

For?

[exotic terrace]

i think i can find cheaper

[dire mist]

The one i sent was for a 350 voron

Which is way to long

Im just suggesting a kit like that

Its more cost effective

[exotic terrace]

i dont think so but i probs cant find one anyway.....

[dire mist]

If you are actually going budget you arent gonna use a pcb lol

[exotic terrace]

its the best i got