Velociraptor Mongoliensis | 3D Printing | Page 1

gloomy bough Feb 19, 2023, 5:33 AM

#

Printing a life sized velociraptor skull. Mostly done, just need to print the teeth and glue everything together. Any gluing suggestions out there? Some spots will need some gap filling, so thin CA probably won't cut it.

pine atlas Feb 19, 2023, 12:40 PM

#

This is awesome

solar jay Feb 19, 2023, 3:46 PM

#

gloomy bough Printing a life sized velociraptor skull. Mostly done, just need to print the te...

2 part epoxy maybe? https://www.amazon.com/dp/B005JZVJMO?psc=1&ref=ppx_yo2ov_dt_b_product_details this is what i use

Devcon Epoxy, 5 Minute Epoxy, 2 Bottles Net 8.5 fl oz (250ml)

Devcon 5-Minute Epoxy adhesive cures and joins materials together by a chemical reaction between the resin and hardener. This reaction results in a high strength bond that is resistant to most chemicals. Use Devcon Epoxy adhesive for household, industrial, crafts or for any job that requires a hi...

gloomy bough Feb 19, 2023, 4:11 PM

#

solar jay 2 part epoxy maybe? https://www.amazon.com/dp/B005JZVJMO?psc=1&ref=ppx_yo2ov_dt_...

Thanks, I'll give that a look. Maybe CA for the tight fitting faces and fill gaps with epoxy so they're less apparent

upper rock Feb 19, 2023, 9:54 PM

#

what filament is that

#

it has such a nic bone color

gloomy bough Feb 19, 2023, 10:03 PM

#

upper rock what filament is that

Esun Bone White PLA+

upper rock Feb 19, 2023, 10:07 PM

#

you'd figure good bone color would have bone in it

#Velociraptor Mongoliensis