#Spoiler Zone
1 messages · Page 1 of 1 (latest)
is it the angle or does the spacebar look like its tilted forward?
you may have installed the keycap upside down?
oh i always install my space bars upside down, been doing it for like 10 years now rofl
i didnt like the sharp edge when you install it normally, maybe thats not a problem anymore idk
same
first mod i do to new wootings
it would eventually start to hurt my thumb and that was a trick people did and i grew to like it
in general it fits better to thumb placement
another sound test to convince you all to lube your switches :))
Oooohhh
Fair enough!
this is super clean
Same, sounds better too
Great built btw
TOFU60 + Tai Hao WoR caps - might get some blank black caps and go full ninja but this is nice for now.
Finally lgot my dang tofu 60 to arrive at my house
show us when you put it all together :o
is the 60HE compatible with cherry profile keycaps?
you can just flip the switches and it would be ok
as it's the magnet position important, it will be exactly in the same place
I only repeated what I read before 😄
Tofu 60he oring mounted still gonna mod out some stuff but i like this alot
wow that's super clean
Pbt fans spark is clean
Shine through caps? Lemme see it lit up
We need photo of it when it's plugged in
Should I tape mod it?
Sure, if you want to
with my board, i didnt really notice a difference in tape mod until i did 4 or 5 layers
Umm... I received the keyboard and there was a big stack of packing slips in the bag. It has peoples' addresses on it and stuff.
wtf...
guess someone fucked up at the fulfillment centers again
those mofos be smoking some good shit
damn thats crazy
that's pretty solid grounds for getting fired
that's really big
at least I hope those packages won't be ¨couldn't send¨ and cause delay
that's a solid ground for a law suit
would probably have been better not to post it around and keep it to private messages lol
too late now
you had to enter preferences for cookies in every site and somebody says f this I will send everybody's address
Oops, guess I should have thought through it a bit more before posting.
Definitely not good, If those slips contain order info mfers at the warehouse probably stealing
Ah they do
That full brightness?
No that's around 20% iirc
tbh its extremely difficult to judge the brightness level accurately from a photo to my experience
typically it'll look a lot brighter on photos than irl
Could I see a photo of it at peak brightness 😂 pretty please
That looks very nice with the cable by the way
when you ask that... https://www.youtube.com/watch?v=jtRFeRFLniY
#warzone #cod #warzonemoments
Watch more Call of Duty: Warzone plays in our channel. You can support us by subscribing. Have a good day!
peak brightness at it's peak
..... He's put so much effort into that omfh
there is a fire thrower
This is the jello rgb preset you can find on the wooting lekker software…pretty nice! 👍
can you do it on single color?
@celest bay Yes you can, you can also adjust the idle brightness to where it’s really dim before you press a key then it lights up really bright when you touch it
that's an effect I can see myself using, nice, thanks
aoe is also a nice effect
you can do it on any static colormap
I can only use it after august though 😄
I mostly use the "touch" one to get visual feedback on actuation depth
but tachyon disables all of these right?
yes
It's beautiful
❤️
Worth pinging @umbral totem on this, and maybe delete the photos? Possibly constitutes a data breach which needs reported to local agencies under gdpr. Probably not a hugely serious one as the scope of the breach is currently limited to one person. But they potentially have to report it and inform anyone whose data was sent out etc. Honestly fulfilment center were doing ok I thought but this is a big no no. Not Wootings fault of course, hope it doesn't cause a headache!
@toxic wharf pls forward internally as calder isnt always here
wouldnt be surprised if quiet a few orders arent getting fulfilled cause the packaging and pickup slips are in that shipment
Could you DM me your order number? We'll contact our fulfilment partner in the US asap to figure out what happened
Yes it is. This is really unprofessional. I'm glad @tropic plinth brought it to our attention. Like Johnny said the scope of the breach is limited though
sure hope so... like i never wanna make people out to be evil but who knows if there isnt someone else who got a tons of slips and just didnt say smth
anyway best of luck
Can you email social@wooting.io about this?
i see those keycaps alot, which set is that?
PBTFans Neon
Wooting 60 HE and ToFu60 looks amazing
what is that wrist rest
it looks perfect for the tofu
Tofu60HE is the new name for your keeb now
lol
its a Wooting wrist rest, fullsize 😄
I need that 60% size wrist rest
and i'll be in heaven
nice, im getting the same tofu60 in a few days but i got white keycaps
I only have problems with the size, I'm left-handed and have used full-size keyboards for 25 years, but i'm getting used to it
am the same, leftie and full-size only for over 30 years, but I've p much adapted to using the typical default wasd mapping most games use with my right for the past few years
so am optimistic about at least partly migrating to a 60
most of the left handed gamers I know still mouse with their right hand
U have mouse in your lefthand?
yep, always have
Nice, i have the Dornfinger Veno S, and you?
been using a g pro wireless since a couple months now
Okay
what are good keycaps to use with wooting?
anything cherry mx compatible afaik
i mean like brands kinda i heard stuff about gmk but not sure whats good and if different brands make a difference in keycaps
gmk probably nice but too rich for my blood, am using steelseries caps and they're just fine for the price imo
yeah i want to customize my 60he whenever it gets delievered with a nice case and keycaps
Yeah rn i'm rocking a tofu and pbtfans neon keycaps
Would u say tofu is a good case
given its popularity it must be doing something right
Smarter Shopping, Better Living! Aliexpress.com
these are not bad for the price
backlit and lots of choice
surprised that the metal ESC works fine - so far hahah although I probably wont keep it there hahah
looks nice! where did you get the keycap from?
KBD fans 🙂 they have it both on their store and they sell it through aliexpress (shipping was cheaper for me through ali) 😄
Hey, I'm making a video about lubing switches. There is also a section at the end where I want to show some community modded keyboards. Can I use your clip there? Ofc, I will put a credit in the video and desc.
changed the case to kbfans low profile aluminium case but the sound was better on the OG case,so confused.
I tried putting 1 layer of electrical tape as well but its still not as good sounding as the OG case
i have lubed the switches
im thinking its something to do with the low profile case that lets the sound out a bit from the sides because its not a perfect fit like the OG case
@tulip sage did u find the OG case better sound too? I'm asking because i bought the same case as you
@vocal socket Is this your video? https://www.youtube.com/watch?v=5-T0JHYHv8M
We would love to use it as one of the examples (with credit of course) on our lube video and potentially website
Just lubed and tape modded for now, will mod/upgrade this fully later, just not really in a rush to dump $200-300+ given the recession and all. I literally have kids to feed.
This is literally the best PCB/Switch combo in both mainstream retail and the customs scene for gaming. Wooting is doing next generation stuff, everyone else is way behind...
any idea when the wooting lube video will be released?
Well yes and no...
I lubed all the switches and foamed the case + i used some orings for the tray mount
So it sounds better now for sure, but i dont really have the stock sound in my head since i pretty much changed the case instantly
What size is the spacebar on the wooting 60HE? Is it OEM, SA?
you're talking about profile then, not size
the profile is oem, and the size would be 6.25u
ah, I was asking about both. I didn't know that the "profile" is what the OEM, SA, so on is called.
is there only 1 LED for the spacebar in the middle? or are there multiple?
there are 5 total
awesome, thanks. I have some ideas for when I get mine in Sept.
tomorrow
so is there a specific way to easily take the switches out? someone said they broke 3 switches with switch puller
you still can take them out to lube though
thanks for the info
awesome thank you!
oh ok yeah i had to wait for the case, i think stock case had a fuller sound
you like the stock case better?
the sound is better compare to the low profile aluminium kbdfans case
its more fuller on the stock i guess its because the low profile lets the sound escape
Stock case is definitely pretty good
I'll probably stick with the stock one, just throw some keycaps I like on and call it a day
Mine sounds great
yeah stock case is really good just hate that its plastic
woulda preferred metal on the two HE rather than the 60HE personally, the latter I want to keep weight down for portability
tho the two feels pretty snug fit for being plastic
i went for low profile thinking that it will be quite a bit slimmer then stock but the difference is minimal
im not going to be traveling with mine so i went with the heaviest case i could find without being super expensive
thats a nice case
looking forward not having to lug a fullsize with me when am going somewhere 
and with the pcb, plate, switches, keycaps, etc. it will be around 3.5 pounds
does it fit perfectly without there being space in the edges?
i think so, i haven't received it yet
oh ok because the kbdfans low profile aluminium is a good fit but there little bit of empty space on the horizontal sides
if you like how the stock case sounds, there are resin cases that look really nice and they're only $30
60% Resin Case Color options: Alabaster White/Galaxy Purple/Sand Storm/Tropical Sea/Mystic Jade/Raven Shade Compatible with DZ60rev 3.0 PCB ( Solderable PCB; RGB underglow; Support QMK firmware and VIA configurator ) only. Screw size: M2-4 Case size: 30611929*22 MM The depth of the battery compartment is 3mm The dep
yeah i seen those thats really similar to what i got though
these aren't low profile
and they have a sound signature close to plastic without feeling cheap
i mean the look of the build is really similar
ahh so plastic actually sounds better?
a lot of ppl like how plastic sounds because it has a deeper sound
but its all preference
the plastic case itself absorbs and dampens a notable amount of the vibrations from typing, a hard slab of aluminium will pass it all on to the table
ty :)
mine is lubed though, it won't sound like that stock
when addi posted this is just had to get it
factory lube is not as consistent or effective as lubing it yourself
no, the switches have a minimal amount of lube on them
the lekker switches are
yeah thats Addis keeb mine has shitry black Corsair set haha
im pretty sure the 60he switches had 0 lube on them
they are lubed
from what I heard the 60HE switches had more lube from factory than two HE
theres even lube on the pcb under the switches
its hard to tell, but there is a slight amount of lube on them
if the 60 he switches are lubed then im blind and deaf lol
the lekker switches always have been lubed
since release in the two he till all 60hes delivered so far
so they can test their noisecancelling headphones ofc
doesn't nake sense how they lubed when they dry AF and after u lube them the sound and feel is night and day
what kinda lube does factory use some invisible lube?
my guy i even took pics of the lube drips on my pcb
all i can tell you is they are prelubed
nope
they are lubed
I don't believe
i get what you're saying, it wasn't really enough lube to call it "factory-lubed" in my opinion but there is lube
i remember even Calder saying the switches are not lubed
@umbral totem comment on this?
would be weird to switch mid production run to non lubed
i dunno i felt or saw 0 lube in my switches lol
Mine isn’t lubed
if memory serves they adjusted the lube amount cause the w2he and LE had massive pcb dripping issues
basically most of the lube in those just literally was on the pcb
the 60he still has minor pcb lube leaking but nowhere near what the 2he and le had
this was before the lube adjustment
literally most of the lube just on the pcb
later runs of the 2he already didnt have as pronounced of an issue with drip https://discordjs.moe/k7a5st092lne.png
this is a 60HE channel mkay
currently trying to find all my unedited 60he disassembly pics
don't worry Calder will confirm soon that 60he switches aren't lubed
u realize the switches are the same since lekker edition right?
bro steeeeel
since the stab lube is flowing accross my entire pcb it feels
here the underside u can see the lube on the bottom of the housing still
@buoyant heart no point in arguing with this guy, he's too fixated on being right
i mean all i can say is they are lubed but not much and with how much the stab lube oozes onto the pcb they could go back to the LE amount of lube and no one would notice
i also had lube on my pcb when i took the switches off, there is no doubt that they are factory lubed
if they are lubed then why the tiniest manual lube makes a night and day difference?
n i lubed every switch and all of them were dry af
thats how lube works...
did i seriously see someone ask why a handlube was better than the factory lube job
no, adding a tiny bit of manual lube makes a big difference because thats how lube works
did i say better or did i say the tinniest manul lube application makes a night n day difference?
wait for Calder to tell both of u
then u bith can bow down to me
lmao
didnt u hear our god emperor goldbullets
ngl i should have asked mark
@tired cove you're just wrong, stop arguing and spreading misinformation
i will wait for calder
why would they put incorrect information on the literal product page?
ah yes
they would've noticed by now if it was a typo...
there are more idiots??? :o
typoing in an entire adjective which even includes a hyphen
doesn't matter, you're wrong
that makes 0 sense
u need to be smarter to understand
sure it does, religious people do it all the time
right, but if we have literal evidence, it doesn't make sense in this context
like how ppl believe the earth is flat
Releases on Thursday, wouldn't expect too much as it's pretty plain
Lekker switch is pre-lubed, I confirmed on few samples when taking apart, but the amount is still pretty controlled
maybe they forgot to lube yours
facts
but its supposed to ship lubed from factory 
The cilinder stem where the magnet rests is well lubed. The glider/rails are slightly lubed.
defo worth it, big difference
but the stock is definitely not bad
totally agree
@tired cove you are so fucking dumb
So sick
Looks to be a carbon fiber layer or complete replacement of clickers and shell
Very cool
3 symm wireless mice. Which do you main?
honesty rn s12 cause of shape
v2 took #2 tho
ngl
Nice. I’m waiting on the Xm2w. You gonna add a fourth?
@ripe prawn considering that razer has a 4k dongle for the v2 pro, i'm not going to ngl
Fuck to you, Ii still dont believe
wut
HUH
ngl I had a stroke reading that.
The stabs are so good out of the box
Now just waiting for the springs so I can lube the switches. Stock feel is pretty smooth, but kind of uneven. Some switches feel different than others.
Not massively, but testing the switches before putting on keycaps, it was noticeable that some were slightly harder going than others
Not really. Slight variance is not unusual, it's nothing you would notice during gaming/typing. Just when you slowly press the switches individually and compare directly.
This is super OCD, but I will batch test the switches (even after lubing) and group them so that even if they feel different, I will put all the similarly feeling switches for the R1 numbers row, and then use the most consistent feeling switches for the alphas, and the most muted switches for the stabilized keys (space, backspace, enter, shift, etc.)
Probably overkill, but if you end of taking them out to lube anyway, it may be worth trying
not overkill at all
hello
hello
it's really hard getting keys to be consistent
i lubed all my alphas now and every row sounds different
all white keys lubed
this takes forever
it worths afterwards, but it doesn't worth during 😄
lol true
i think the spacebar shouldnt be manually lubed
it gets mushy very easily, even if you only lube the stem
not very noticable during typing but really crappy when gaming
I received mine today and super happy, if put it in an alu case I still had, looks nice and the software and analog features aswell as rapid trigger seem fantastic. Only downside (for me) are the keycaps - I dont rly like the feeling of them. Anyone has some idears for replacments?
pbtfans neon are what I want, though im gonna be boring and run my current gmk wob that I already have
am happy just having a bit of that coarse surface feel most pbts got, can get that with rather cheap sets
I normaly run kat keycaps, which is rather smooth
Kat shine through woud be nice. But my Kat keycaps right now are like still in production, since 2 years kekw
Yeah that'd be just fine..
\
Which parts of the switch did u lube ?
A day too late 😅 for the video, but we might use it for something else. Thanks alot
What I wait most in package is to find my name on it xD
The Stem, Inside of the center cylinder for the stem on the bottom casing, walls of the bottom casing, and the walls of the upper casing.
Nice clean coat on the casings, a little extra dabs all over the stem except the knob for the keycap. Hard to over-lube since once you put the switch together, you can just click it a handful of times, to catch any excess that comes out.
Ok thanks
Hello
Man this is beautiful
Ain't it tho
https://www.youtube.com/watch?v=glQNEbh79xg awww shiiit
Wooting 60HE: https://next.wooting.io/wooting-60he
KBDfans (affiliate)
Tofu 60% case: https://kbdfans.com/r?id=rff1f3
Black blank keycaps: https://kbdfans.com/r?id=q1gl5f
BadSeed Tech: https://youtu.be/2kvmccinWMk
The future of gaming keyboards.
Video gear
Camera: https://geni.us/cN16f
Primary Lens: https://geni.us/Mfv0kQO
GMK 80082 arrived today, right on time:D
so clean
are you gettting a 3rd party case?
thanks<3 maybe in the future. - are u?
I really wanted a mekanisk but too expensive + unavailable :/
although idk, I think the original case is pretty sweet and sounds good hahah guess I'll think about it
i ordered the blade60 but it hasn't arrived yet
yes ofc :)
All the w00tings :D/
Hei. just got my wooting 60he and I have to say that the unboxing experience was one of the best I ever had. I really enjoyed all the details and the look of the packaging. Very well thought and put together. Cheers!
what is the best settings for low input for fortnite
I mean, putting the actuation point on .1mm and tachyon mode should get you the lowest input
Finally it arrived
just ordered today.....time to wait kek
thanks what about the rapid trigger thing
just depends on what you like
I have it on .1mm but it's a little hard to get used to
shop tells u
avr just ran out i just noticed
ordered the freebird60 case + cablemod + lube kit from wooting, really hyped;D
60HE
cool:D having usb hub + shorter cables or wireless would make it look 100x better and cleaner
also cable ties
Yeah the monitor arm has cable management and I need to do cable management for keyb/mouse somehow.. But I'm moving soon so in couple months 🙂
best of luck! 
I wanna get white alu/alu case, wud look good?
yeah most likely, it looks pretty clean even with the stock case
asking here as well bc captain is spamming up the 60he channel, can mod tap be set up on digital profiles?
yep
How? I don't have the akc on my wootility for some reason
It would look similar to this
ur on v4.4.9?
you're not on the latest wootility version
use the web version, it always stays up to date https://wootility.io/
I had the same issue, just reinstall ig
or redownload the non-beta version here: https://next.wooting.io/wootility
i assume you accidentally downloaded the beta somehow, I'd love to know how if you did
ik ur not asking me, but in my case I downloaded beta version in the past and then just updated it so it looks like on the ss that jackattack sent
Right makes sense, thanks
We should re-enable that notification that the beta is no longer the latest version
Maybe? I just downloaded the one that came up with a Google search.
around what date did you download Wootility?
rough guess, early june? wanted to play around with profiles before the 60he came in
nah thank YOu, just updated to the new version and it all works!
enjoy
sus
Is red a good choice?
Now my setup is in sync
when the nighttime comes, my eyes are definitely appreciative of red, but daytime? rgb all the time
nice
what gpu is that
MSI 3080 suprimX
Is there any way to change the keyboard profile without using the software?
using the analog buttons
3 profiles on the keyboard
what do you mean by using the analog buttons?
60HE?
You can set up profile switching in your function layer to switch between your 4 profiles (1 digital 3 analog)
i can see another address on the sticker, i'd remove this picture from here...
Isn't that Wooting's store address? I thought it's fine, but if it's a problem, I'll remove it
Wooting store is fine
are the modifiers modern dolch?
thought pbt would be more expensive?
no not always
entirely depends on the set
for example that set i showed you is only 40 euro
I know GMK is very expensive, I meant by the material cost
but theres premium abs sets that cost 150
I saw today on Aliexpress doubleshot abs for 50€, I was curious if they would shine or get bad quickly
I have keychron K3 which really shines badly...
if you go with anything below 50 i'd pick PBT
makes sense
Looks awesome 😍
You should create a page on the wooting website with pictures of customized 60HE's for everyone to submit
that'd be pretty cool
can you share where you bought them?
Smarter Shopping, Better Living! Aliexpress.com
but it seems they are out of stock now, but maybe you can find something similar from that vendor
i found it, still in stock here: https://www.aliexpress.com/item/1005003728273426.html?pdp_npi=2%40dis!EUR!€+49%2C40!€+41%2C98!!!!!%402100bb5116599762547565729e5395!12000026955575780!sh
Smarter Shopping, Better Living! Aliexpress.com
and lots of options there
ahah that's the one I found for modern dolch but it's doubleshot abs
I thought yours is PBT
yeah the first link is mine, is PBT
ooh i see the third link are all ABS, that sucks
true!
Just a little PSA
PE Foam mod doesn't seem to affect functional performance
Also... sound profile... I don't know I've never PE foam modded a STEEL plate board before but it's interesting. Removed EVA Foam to bring out the sound signature more. If anyone was modding it and getting sick of the sound signature remaing the same because of the plate, a food for thought.
ah i tape modded. and for once I used gaffer's tape on this, not electrical tape, the plate doesn't sound good with the higher-end enhanced (which is what electrical tape does and works great on certain boards).
volume increased by 6DB on that file.
The keyboard finally came today after 9 months of waiting, thank you wooting, the keyboard feels so fricking nice
.
.
,
'
`
¨
˜
●
⚪
👀
whos also batch NA Haze? cant wait for the keyboarddd
Is the 60he cheaper in the us☠️
yesnt
pretty sure the price is without vat as the us has what feels like 20million vat rates
ahh ofcourse the tax
Went to RLCS Worlds, keyboard looks so sick now
smh not even the founders on there
jk looks cool
altho i maybe would have blurred the SN of your keeb
U right
You know I've got quite a few PBT keycap sets.
And while I'd kind of talked mess about the Wooting's default stock keycaps before, especially since getting the board on a pseudo gasket case...
I can't help but notice how almost velvety and soft the stock keycaps are compared to other full price PBT options by comparison (TaiHao, Drop Skyline, Razer, YMDK...)
I know the first thing people like modding are the key caps, but ya'll gotta consider modding AROUND the keycaps, cuse stock keycaps are pretty tight.
ps (xD I say this as my blank keycaps are about to get delivered to me today)
Yeah, the Wooting pbt caps are top tier. Really nice finish and really nice and thick walls. Sound signature is really nice. Just wish they had a bunch of colourways, honestly they are so much better quality than almost any other manufacturers that they could make money just doing runs of caps imho.
Personally the font kills it for me. Looks like great caps but the nature of shine through is not something I prefer
Woof I'd hate for you to see like.... Razer or Corsair fonts, if you think these are bad.
Think you meant to reply to the other guy? Personally I like the Wooting font...
received mine just now from EU-Pi batch
trying to find myself on box rn lmao
ok i found
i just got my 60he and my dumbass thought the blank keycaps were... y'know, blank...
But they have legends on them. can't believe i didn't see the legends when ordering.
I'm kind of upset, I've been daily driving blank keyboard for years
Nothing stops you from swapping the keycaps sir
well, at least now people who aren't me can type on my keyboard
Couldn’t wait 😍 get it before i leave for work. Eu-Pi
Moon is still nice addition
just need to change the colours of background rgb now
Smol
los wootings hermanos
that's chaotic 😄
got a low profile case, now I just need keycaps
How short is that? Or do you mean lower sides with "low profile"?
I don't have a ruler around but it's pretty short
with this setup, you should be a killing machine in whatever fps you play 😄
yo what case is that
actually i really love the look of that
being able to see the switch
Smarter Shopping, Better Living! Aliexpress.com
oh and its in white lets go
Looks like a copy of the kbdfans low profile one.
Got it for 23 $
there's a couple clones but they seem to get more expensive as time goes on
Just checking in real fast - Was the Fjell compatible out of box, or did you have to make any changes? Is it still working? 🙂
Worked right out of the box, I just removed the middle stand off, and I had to put a little pressure to it, cause I just reused the foam that came with the 60HE
Awesome! I'll add it to the official list then. Thanks for confirming 🙂
Np 😊
GMK Keycap Specification: Produced by GMK Profile: Cherry Sculpt:1-1-2- 3-4-4 Legends: Doubleshot Plastic: ABS Designed by Skok RAMA Keycap Specification: Made of Alum/Brass Profile: R1-1U size (ESC) Alum version: anodizing finished with colors enamel infill Brass version: PVD finished compatible with MX switches and
If you're looking for Norge caps
Nice, just gonna keep my Evil Dolch for now tho, need to save some money 😂
got any recs for something like this where the blues are replaced with a red/maroon?
does not need to be GMk
You mean the modifiers?
Yes...the blue ones
GMK Evil dolch / dolch
@sick sequoia yo, do you have a sound test of your board with the fjell case?
Planning to pe case foam it (almost thin) instead of the thick foam provided to make it "clack"
I think it's here somewere. Very low quality.
Sec
@hollow willow This is stock with just Fjell
Tysm x
First 
Last
.
.
Welcome
were gonna be true gamers in a couple of days
@royal hearth
The prefix in this guild is set to: !
im very aware luv, im just summoning u xo
Aye its pretty great, there is a lot more to come too!

got i am so inclined
okay so you know what
if i get the internship somehow and make money
i'll put the extra to the 60HE
but fuck me
i was a little confused by this😂
so beautiful, the keyboard of course
If only it was 2 T's
How long you think it would be if I got fast shipping and air fright but I am in Australia would I get it this week
?
This wouldn't really be the right channel for that but to answer your question it should be within a week after sent out.
I'm not sure how fast Australia shipping is once it reaches there.
Ok thanks
Fuck, there was an option for fast shipping too? Where can I check what I got? I only have air from factory to HQ i think.
If u only chose air freight, then u probably have normal shipping. 3-5 days
Ik NA was able to choose overnight shipping and two day shipping
Not sure what I picked, but in my hub I can only see air freight.
Ahh
Rip lol
Let me check mine
Ik what I chose but I’m gonna see if it says it anywhere
Yh nah doesn’t pop up for me
Maybe check ur emails or something 😂😂
Ye found it in my order mail
PostNL - Priority Express
Not sure what that means tho
Well well
Priority express sounds good, but is probably a medium option. Should have been Ultra 1 day priority shipping.
Mine cost 17.95, so I probably have the slow one..
Rip
uhm in the wooting hub i think
I had to check my mail for it
Nope
Was there even overnight shipping for all regions ? I paid a grand total of 0€ for shipping and I bet I would have paid for express shipping if I'd been given the option
not for all regions
the fulfillment center has a list of available destinations that have express contracts
and displays appropriately in shopify
I'm in Germany for example so I suspect there's not really a point in express shipping, parcel from NL gets to me almost as fast as parcel from within Germany anyways
Like local DHL takes usually a day, two if I'm unlucky and from NL it's often times the same but just happens more often that I have to wait that second day
so if i chose overnight shipping and theyre starting my batch tmrw. i should have it wednesday?
Same
Lucky, i paid 18 euro cos of brexit
But no it was only avail for US
it wasnt
yh so i should be able to get it wednesday if it ships out tmrw?
Possibly yes.
how did u get this up ?
Added a keyboard to cart and clicked calculate shipping.
Am I going to pay for shipping since I choose and pay for air freight?
No answer?!
@chrome fjord depends on the country
How about Saudi Arabia ?
wouldn't you've already paid for shipping when purchasing? i know i did, plus the additional cost of air.
yeah I think it was that way for me too
OMG IT CAME ITS SO SMOOTH 🙂 TY <@&375234916776017933>
bro reselling on Ebay 💀


Nah it’s just a bug haha they’re all the same order
Best be 
Damn man hasn’t been shipped sadge
got my tracking number lessgoo
Us? :p
ye
Still don’t got mine 😔
I live in NL and some of you muricans will get it before me idk If I schould be happy for you getting it early or mad that my basepoint came with lag compansation?
Well I’m from the US and mine hasn’t been shipped yet lol
same no tRacking yet either but they set from yesterday till saturday so I will just be a good patient boi
@mighty bane ig 😂
@mighty bane if it helps someone got their lekker same day it shipped out last time lol
Since the Wearhouse is in the Netherlands
It's very close
well thats what I am expecting it can't be farther away then 2h here kekw
end to end thats how long this country is
I'm not promising anything though 🤪
I don't think any UK peeps or EU got any orders today
of course only the shiping lords up in babilon know now
Or well tracking
There must have been some delay or something at the distribution
As a lot of orders for marked for packing but never got packed lol
Even mine
shipping go weeeeeeeeeee
I miss when they manually posted me things
My perks don't pay as well these days ;)
So I'm suffering like everyone this time 
oofs Wooting give and wooting takiv away lmao
man I don't know how they do it, I play starcraft I play quake I hit fat wips on them minecraft kids do block clutches or whatever they call it in those bedwars (still sounds dertiy btw) and yet once them fort-kights start cranking shit I do two 90ties and get outa there
that shit scary
@uncut light I do love that profile pick btw
Thank you ❤️
definitely not yet, i'm hoping this week!
WOENSDAG 22 JUNI
17:30 - 21:30
CANT wait..... 6 more hours until it arrive's!!!!
Hypeew
Yes sir!!!!
Hello! may i ask what does "pending" in the order hub mean?
I’m wondering the same thing been pending for 5 hours
@abstract blaze @obtuse bramble pending means that your order moved from a "pre-order" status to an "in process" status.
This step can take 24-48 hours, the next step is "Ready to pack."
Some sea-freight or ARM orders may also see the pending status temporarily, but those will correctly revert to a pre-order status once the system gets everything reorganized.
Oooo, how long does ready to pack take?? 👀
Typically within a business day, max two. But there are currently hundreds of orders in queue so it could take a little longer.
👀👀
Kk thanks
It’s been ready to pack since yesterday in the morning
So just gotta wait now 😊
😩😩😩
The box is really good looking on the inside put in good
still ready to pack 😭
I’m able to post the inside of box roght?
Yup
👀
You can post anything mate
You can choose to spoiler or not here, people have been warned this is a spoiler zone.
#984812981458186370 or any other channels must have spoiler tags.
YE BOI
ooo
It’s so light
Sound test pls?
tmw the reviewers cant press publish on their vids
❤️
What keycaps are the other ones?
it looks amazing
also
@gloomy pulsar i got the internship
so you know what that means 
i will have money for a 60HE 
Grats buddy!
Thats the logical approach at this point id say.
but im sure that in 1-2 months theres gonna be some news about that perhaps
yeah
i dont need it right now
and the 40 advanced key slots since i am such a heavy user of F keys
12 F keys + 4 arrow keys + more that i want
i could use with the 40 limit
60he?

weeeeee I squiked like a littel girl when the doorbel rang

lol why were there two messages
dw, discord does that sometimes
dust tho
I don't know if I like the strap on... 
You will like it after your first try baby.
Maybe Im just anxious 
Whoo
Can you make a picture of the whole outer box. I never have seen these shipping boxes in person 😮
Feels amazing so far
Grats for all, have fun 🥰
Almost broke my neck viewing that Tazzy... Looks awesome though!
Ahhhhh
Scary
sry bud with any other part of the box I dox myself dhl made sure
we gaming now
Damn mines not packed yet
dame thiught 8 croped out that mess oh well

went straight to the end game
the 60he feels so dame good I could just keep pressing the bouttons all day
same p much, haven't had a "gaming" keyboard since the first G15 sometime 2008 
cus there is this funny thing on the other side of the pond called the European Union

some shipping centers are slower than others
They look so beautiful 😆
Strap 🔥
you know how it is I keep that strap on me
carry that to lan like a handbag
Deft, this is the way
Nice, should get yourself a nice green coiled aviator cable to go with that, would look sick.
My Woo ting 💫💫💫
Thanks for the plastic Ig :)
Is it good for gaming
Didn't try it yet had to do school work
Lol
and u didnt do that with ur wooting?
I couldn't it was in the books
got it
man I am used to cherry mx red switches
these are so god damn smooth its insane
i like how quiet the board is too
you can totally use this at an office
Any sound tests yall
it feels a lot heavier than 600grams fr
i was worried for a second when I noticed there arent any flip out feet
but you dont need them at all
its perfect
my cherry mx board feels like dogshit now
dried or fresh
fresh i would say
hmmm
I have a Lekker keeb with these switches and i had to move back to Cherry blues because the lekker is to big, i have been suffering waiting for the 60he
😦
why didnt you return it?
when you first got it
or you could probably sell it pretty easily
Oh, it was a gift/testing purposes
oh I see
I can't wait to see what wooting comes up with next
how do you top this?
hehe
How do we top this? Make a keyboard from pure gold. With diamonds as keycaps .
i mean
u know what u could do
not good enough
rhodium case pls
😂
Though I guess reverse version would be nice too with golden keycap and shinethrough letters being from diamonds
I know what is Troy but clueless what is Troy ounce 

600g is roughly 60he weight
real answer tho a few ghz of multicore arm
Make a custom ASIC mcu
Separate ADC for each key
ADCs would have small core to determine if change is significant enough to send to the main core
how about detachable numpad
not a bad idea
only for TKL keyboards tho
make glarses triple keyboard with lekker switches
lol @gloomy pulsar pls fix
i think you will find its spelled aurora borealis
Bro I wish
how does it sound

nice
it sounds unlike any other keyboard I got and I got lots
it's great
its quiet enough for office use
has a real nice thock
i would get a second one for the office if I didn't work from home so often
yeah my twoHE also has that
but i suppose the 60HE is even better
how is mod tap?
i found it sooooo accurate on the twoHE
well im new to wooting keyboards, haven't messed alot with the software yet
but i did switch the arrow keys to the wasd keys on fn1
seems more natural to me
i think since i never use the right shift, ctrl alt and the menu key
i'd just move the fn key to right alt
and use the shift+menu+former fn + rightctrl as permanent arrow keys
personally
oh yeah thats not a bad idea
right?
had it today 😄 why mess with mod tap when i can just use the useless keys on the right
yes! thats an excellent idea

infact i have a second set of wooting pbt keys

because you can just rebind the fn key afaik
yeah
so that changed everything for me
when i learned that 😄
also you can make new and custom FN layers
its ridiculous really 😄
yall's EU folks so lucky US shipment taking ages
true
i have a "custom" AKKO set and its so nice on the twoHE
lucky ? <- Germany status Rdy to Pack 😄
60HE is looking great! 🙂
i wonder when we can write a review for this thing on the website
27.6 - NDA - End
oh cool
what keyboard did you have prior?
akko 9009 75% and before a blackwidow
both kinda suck hard compared to this
don't worry dude they are tucking it in for you
its just waiting for DHL then
@pine turtle i mapped the menu/rightctrl etc to the arrows like you said
its genius
thanks so much
i tried the mod tap for the arrow keys but obviously that won't work if you want to hold the key down
i much prefer your way
yeah thats one of the things i found a little limiting for mod tap
love to see its a good idea 😄
gonna use it as well when if when i get my 60HE
if i get the money for it
twoHE for my primary PC
and hyperx origins alloy core red switch for my to-go work keyboard (TKL)
macbook built in scissor for my macbook air
one testing kemove 60% hotswap board as well
used it with my ipad before i sold it
but it has some issues
well, a lot

well yes the twoHE is amazing
i thought the red switch on hyperx was great (and it still holds up tbh smoothnes wise)
but as soon as i switched to the wooting and then back to that one
its like sand
on a beach
its horrible 
haha yeah i feel the same way about my mx reds now
yeah
oh and the testing 60% i have is gat reds + a box jade + gat yellow lubed for spacebar
plus something else xD
i just tested a lot of different switches etc
i got the topre leopold
its quite nice but i think i still prefer the 60HE
and topre sucks for gaming
but really nice for work
i just never liked rubber domes
but apparently topre is rounded feeling?
so very smooth? i think i tried a smooth rounded board once
and it was really nice
not sure tho how the topres are
yeah, its hard to describe but you really cant compare to the "standard" cheapo rubber domes
it's really good
hmmm






